HH Electronics B15L
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48 Hz |
| Qts | 0.479 |
| Qes | 0.52 |
| Qms | 6.09 |
| Vas | 151.7 L |
| Sd | 730.6 cm² |
| Xmax | 3.6 mm |
| Re | 6.73 Ω |
| Bl | 14.6 T·m |
| Mms | 54.2 g |
| Pe | 100 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 92 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 128.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion TF 1525E 4 Ohms | 47.5 -0.5 | 0.473 -0.01 | 141 -10.7 | 3.5 -0.1 | 97.2 -0.6 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| SICA P-A-PL15B3S | 46.5 -1.5 | 0.479 = | 139.8 -11.9 | 5.5 +1.9 | 98.3 +0.5 | close | + | |
| RCF L 15P530 | 45 -3 | 0.478 = | 160 +8.3 | 6.2 +2.6 | 98.5 +0.7 | close | + | |
| Celestion TF 1525E | 49.8 +1.8 | 0.493 +0.01 | 128.2 -23.5 | 3.5 -0.1 | 97.6 -0.2 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Audax PR380T0 vp_d | 50.5 +2.5 | 0.472 -0.01 | 137.8 -13.9 | 3.3 -0.3 | 98.8 +1 | close | Xmax 3.3 mm < 3.6 mm: lower excursion-limited SPL | + |
| Celestion 15 Professional Woofer - OEM | 46.9 -1.1 | 0.497 +0.02 | 175 +23.3 | 3.5 -0.1 | 98.8 +1 | close | Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3015 LF v2018 | 44 -4 | 0.456 -0.02 | 150.9 -0.8 | 6.6 +3 | 97.9 +0.1 | close | + | |
| Eminence KAPPALITE 3015 LF v2014 | 43.7 -4.3 | 0.456 -0.02 | 150.9 -0.8 | 6.6 +3 | 97.8 = | close | + | |
| Eminence KAPPALITE 3015 LF v2016 | 43.7 -4.3 | 0.456 -0.02 | 150.9 -0.8 | 6.6 +3 | 97.8 = | close | + | |
| LaVoce WSF152.50 | 46 -2 | 0.505 +0.03 | 137 -14.7 | 4.7 +1.1 | 97.3 -0.5 | close | + |
Compare the closest 3 against the B15L →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.