hertz Hertz Audio ML2500
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 33 Hz |
| Qts | 0.497 |
| Qes | 0.52 |
| Qms | 11 |
| Vas | 19 L |
| Sd | 387.1 cm² |
| Xmax | 8 mm |
| Re | 2.6 Ω |
| Bl | 16.3 T·m |
| Mms | 257.1 g |
| Pe | 700 W |
| Sensitivity | 88 dB |
Alignment hint
| EBP | 63 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 18.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Alpine SWR-10D2 | 31 -2 | 0.505 +0.01 | 18 -1 | 10 +2 | 85.1 -2.9 | close | + | |
| hertz Hertz Audio MPS 250 S4 | 29 -4 | 0.476 -0.02 | 21.2 +2.2 | 8.2 +0.2 | 85.8 -2.2 | close | 500 W vs 700 W: lower power handling | + |
| Rockford Fosgate T0D210 | 30.5 -2.5 | 0.508 +0.01 | 16.3 -2.7 | 8.1 +0.1 | 84.7 -3.3 | close | 550 W vs 700 W: lower power handling | + |
| Dayton Audio SS10-22 | 34 +1 | 0.402 -0.09 | 20.6 +1.6 | 8 = | 87.1 -0.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal SUB25KXE | 38 +5 | 0.52 +0.02 | 20 +1 | 8.2 +0.2 | 91.7 +3.7 | close | 2 Ω vs 4 Ω: amp load changes | + |
| American Bass DX 10 | 36.1 +3.1 | 0.486 -0.01 | 20.7 +1.7 | 12 +4 | 84.4 -3.6 | close | 250 W vs 700 W: lower power handling | + |
| Polk Audio MM100 | 35 +2 | 0.46 -0.04 | 22.1 +3.1 | 8.7 +0.7 | 84.7 -3.3 | usable | 400 W vs 700 W: lower power handling | + |
| hertz Hertz Audio ML2500.3 | 33 = | 0.598 +0.1 | 23.5 +4.5 | 10.3 +2.3 | 87.8 -0.2 | usable | + | |
| Oxygen AIR2 250 | 36.4 +3.4 | 0.502 +0.01 | 22.4 +3.4 | 5.8 -2.2 | 88.3 +0.3 | usable | 250 W vs 700 W: lower power handling · Xmax 5.8 mm < 8 mm: lower excursion-limited SPL | + |
| JBL P1022 | 29 -4 | 0.542 +0.05 | 20 +1 | 7 -1 | 90.3 +2.3 | usable | 2 Ω vs 4 Ω: amp load changes · 400 W vs 700 W: lower power handling · Xmax 7 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the ML2500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.