Hertz Audio DS 38.3
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 23 Hz |
| Qts | 0.65 |
| Qes | 0.74 |
| Qms | 5.4 |
| Vas | 244 L |
| Sd | 847 cm² |
| Xmax | 9 mm |
| Re | 3.3 Ω |
| Bl | 11.4 T·m |
| Mms | 198 g |
| Pe | 300 W |
| Sensitivity | 87.9 dB |
Alignment hint
| EBP | 31 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1330.2 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Rockford Fosgate P2D4-15 | 20.9 -2.1 | 0.655 +0.01 | 219.6 -24.4 | 11.3 +2.3 | 87.3 -0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Dayton Audio IB385-8 | 21.5 -1.5 | 0.588 -0.06 | 248.9 +4.9 | 12.4 +3.4 | 89.8 +1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Rockford Fosgate P1S2-15 | 23 = | 0.55 -0.1 | 191.5 -52.5 | 9 = | 87.4 -0.5 | usable | 2 Ω vs 4 Ω: amp load changes | + |
| Rockford Fosgate P1S4-15 | 23 = | 0.55 -0.1 | 191.5 -52.5 | 9 = | 87.3 -0.6 | usable | + | |
| Rockford Fosgate P115S4 | 24 +1 | 0.62 -0.03 | 172 -72 | 8 -1 | 87.3 -0.6 | usable | 200 W vs 300 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Hertz Audio ES380.1 | 24.2 +1.2 | 0.52 -0.13 | 183 -61 | 9 = | 88.2 +0.3 | usable | + | |
| Oxygen AIR2 380 | 22.7 -0.3 | 0.543 -0.11 | 202.2 -41.8 | 11.5 +2.5 | 91.6 +3.7 | usable | + | |
| Rockford Fosgate P3D4-15 | 22.4 -0.6 | 0.566 -0.08 | 155.8 -88.2 | 11 +2 | 87.3 -0.6 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Dayton Audio DCS380-4 | 22.9 -0.1 | 0.504 -0.15 | 233.9 -10.1 | 8.4 -0.6 | 92.9 +5 | usable | Xmax 8.4 mm < 9 mm: lower excursion-limited SPL | + |
| Hertz Audio ES380 | 24 +1 | 0.52 -0.13 | 220 -24 | 9 = | 93.7 +5.8 | usable | + |
Compare the closest 3 against the DS 38.3 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.