Hertz Audio DS 250.3
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 36 Hz |
| Qts | 0.62 |
| Qes | 0.69 |
| Qms | 6.35 |
| Vas | 29 L |
| Sd | 354 cm² |
| Xmax | 10 mm |
| Re | 3.54 Ω |
| Bl | 11.8 T·m |
| Mms | 120 g |
| Pe | 200 W |
| Sensitivity | 84.8 dB |
Alignment hint
| EBP | 52 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 96.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JL Audio 10W0V3-4 | 32.09 -3.91 | 0.604 -0.02 | 31 +2 | 11.4 +1.4 | 84.07 -0.73 | close | + | |
| Alpine SWE-1042 | 33 -3 | 0.66 +0.04 | 33 +4 | 11.7 +1.7 | 84.1 -0.7 | close | + | |
| JL Audio 10W0V3-4 | 32.1 -3.9 | 0.604 -0.02 | 31 +2 | 8.7 -1.3 | 86.7 +1.9 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 8.7 mm < 10 mm: lower excursion-limited SPL | + |
| Focal 10WM | 31 -5 | 0.683 +0.06 | 28 -1 | 9.2 -0.8 | 85.4 +0.6 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 9.2 mm < 10 mm: lower excursion-limited SPL | + |
| Polk Audio DB1040 | 35 -1 | 0.55 -0.07 | 28.3 -0.7 | 7.5 -2.5 | 85 +0.2 | close | Xmax 7.5 mm < 10 mm: lower excursion-limited SPL | + |
| hertz Hertz Audio ML2500.3 | 33 -3 | 0.598 -0.02 | 23.5 -5.5 | 10.3 +0.3 | 87.8 +3 | usable | + | |
| Gladen RS-X 10 | 35.57 -0.43 | 0.46 -0.16 | 27.8 -1.2 | 10 = | 85.9 +1.1 | usable | + | |
| Focal R-250S | 35.4 -0.6 | 0.596 -0.02 | 28.1 -0.9 | 7 -3 | 88.2 +3.4 | usable | Xmax 7 mm < 10 mm: lower excursion-limited SPL | + |
| American Bass SL 104 | 33.6 -2.4 | 0.52 -0.1 | 26.8 -2.2 | 8.5 -1.5 | 84.3 -0.5 | usable | Xmax 8.5 mm < 10 mm: lower excursion-limited SPL | + |
| Brax MATRIX 10.1 | 35.8 -0.2 | 0.53 -0.09 | 35.34 +6.34 | 12.5 +2.5 | 86.5 +1.7 | usable | + |
Compare the closest 3 against the DS 250.3 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.