GRS 12PF-8
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 1.543 |
| Qes | 2.08 |
| Qms | 5.97 |
| Vas | 149.5 L |
| Sd | 517 cm² |
| Xmax | 3.5 mm |
| Re | 7.56 Ω |
| Bl | 6.4 T·m |
| Mms | 51.8 g |
| Pe | 100 W |
| Sensitivity | 87.1 dB |
Alignment hint
| EBP | 17 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Conrad DYH-1220 vp | 33 -2 | 1.64 +0.1 | 164.9 +15.4 | 3.9 +0.4 | 89 +1.9 | close | + | |
| Goldwood GW‐212/4 | 35.8 +0.8 | 1.204 -0.34 | 166.6 +17.1 | 3.5 = | 88.9 +1.8 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Goldwood GW-212/8 | 38.8 +3.8 | 1.439 -0.1 | 101.7 -47.8 | 2.5 -1 | 87.3 +0.2 | usable | Xmax 2.5 mm < 3.5 mm: lower excursion-limited SPL | + |
| Goldwood 212/8 | 38 +3 | 1.44 -0.1 | 101.6 -47.9 | 2.5 -1 | 86.3 -0.8 | usable | Xmax 2.5 mm < 3.5 mm: lower excursion-limited SPL | + |
| Lautsprecher Technik MHB-12 | 38.2 +3.2 | 1.107 -0.44 | 132.7 -16.8 | 5 +1.5 | 88.9 +1.8 | usable | + | |
| SpeaKa 180/200 | 28 -7 | 1.39 -0.15 | 115.4 -34.1 | 5.1 +1.6 | 83.4 -3.7 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| JB Systems SP12/200 vp | 42.9 +7.9 | 1.385 -0.16 | 107.3 -42.2 | 3 -0.5 | 89.5 +2.4 | usable | Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
| Sphynx SP-31-S | 41 +6 | 1.255 -0.29 | 101 -48.5 | 3.8 +0.3 | 88.8 +1.7 | usable | + | |
| Sony XS-NW1201 | 27.5 -7.5 | 0.928 -0.61 | 151.21 +1.71 | 4.15 +0.65 | 86.7 -0.4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Goldwood GW-1248 | 33.3 -1.7 | 0.933 -0.61 | 103.6 -45.9 | 3 -0.5 | 87.2 +0.1 | usable | Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 12PF-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.