Goldwood GW-215/8
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 29.5 Hz |
| Qts | 1.952 |
| Qes | 2.694 |
| Qms | 7.087 |
| Vas | 366.5 L |
| Sd | 823.4 cm² |
| Xmax | 3.5 mm |
| Re | 7.1 Ω |
| Bl | 6.1 T·m |
| Mms | 75.5 g |
| Pe | 135 W |
| Sensitivity | 87.9 dB |
Alignment hint
| EBP | 11 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Goldwood GW-215/4 | 29.6 +0.1 | 1.861 -0.09 | 291.6 -74.9 | 3 -0.5 | 88 +0.1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
| GRS 15PF-8 | 29 -0.5 | 1.394 -0.56 | 265.9 -100.6 | 4 +0.5 | 87.7 -0.2 | usable | + | |
| DS18 BD-X154D | 35 +5.5 | 1.719 -0.23 | 240 -126.5 | 6.1 +2.6 | 88.5 +0.6 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Carpower SP-382C | 30 +0.5 | 1.279 -0.67 | 320 -46.5 | 3.5 = | 92.1 +4.2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Mercuriale HTR 386 M0 | 32 +2.5 | 1.255 -0.7 | 428.8 +62.3 | 3.6 +0.1 | 91.6 +3.7 | usable | + | |
| Europsonic TS38/300D | 28 -1.5 | 0.994 -0.96 | 382.6 +16.1 | 6 +2.5 | 90.3 +2.4 | usable | + | |
| Goldwood GW-215/40/8 | 30.5 +1 | 1.087 -0.86 | 261.2 -105.3 | 3.5 = | 89.8 +1.9 | usable | + | |
| Europsonic TS30/250D | 34 +4.5 | 1.067 -0.88 | 402.5 +36 | 5.4 +1.9 | 92.7 +4.8 | risky | + | |
| Supravox 400-2000EXC_05V | 25 -4.5 | 1.011 -0.94 | 434 +67.5 | 5 +1.5 | 90.9 +3 | risky | + | |
| Jinwey YDA-380-4 | 34.3 +4.8 | 1.186 -0.77 | 252.9 -113.6 | 3 -0.5 | 93.9 +6 | risky | 4 Ω vs 8 Ω: amp load changes · Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the GW-215/8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.