Goldwood GW-1248
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33.3 Hz |
| Qts | 0.933 |
| Qes | 1.3 |
| Qms | 3.3 |
| Vas | 103.6 L |
| Sd | 525.9 cm² |
| Xmax | 3 mm |
| Re | 7.1 Ω |
| Bl | 9.9 T·m |
| Mms | 85.5 g |
| Pe | 150 W |
| Sensitivity | 87.2 dB |
Alignment hint
| EBP | 26 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| GRS 12SW-4 | 29.6 -3.7 | 0.991 +0.06 | 90 -13.6 | 4.5 +1.5 | 88.1 +0.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Pioneer PAX30G vp1 | 36.4 +3.1 | 0.816 -0.12 | 122.3 +18.7 | 3 = | 87.8 +0.6 | close | 16 Ω vs 8 Ω: amp load changes · 60 W vs 150 W: lower power handling | + |
| Pioneer PAX30G vp2 | 42.1 +8.8 | 0.879 -0.05 | 92.7 -10.9 | 3 = | 88.2 +1 | usable | 16 Ω vs 8 Ω: amp load changes · 60 W vs 150 W: lower power handling | + |
| Sony XS-NW1201 | 27.5 -5.8 | 0.928 -0.01 | 151.21 +47.61 | 4.15 +1.15 | 86.7 -0.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Infinity 1200WIB vp | 35 +1.7 | 0.789 -0.14 | 116 +12.4 | 5.1 +2.1 | 92.8 +5.6 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Sphynx SP-31-S | 41 +7.7 | 1.255 +0.32 | 101 -2.6 | 3.8 +0.8 | 88.8 +1.6 | usable | + | |
| Lautsprecher Technik MHB-12 | 38.2 +4.9 | 1.107 +0.17 | 132.7 +29.1 | 5 +2 | 88.9 +1.7 | usable | + | |
| Pioneer TS-W306R | 24.6 -8.7 | 0.815 -0.12 | 102.1 -1.5 | 11.6 +8.6 | 87.9 +0.7 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Europsonic TS30/600PRO | 32 -1.3 | 0.782 -0.15 | 65.9 -37.7 | 4 +1 | 86 -1.2 | usable | + | |
| Europsonic TS30/600PRO-8 | 32 -1.3 | 0.782 -0.15 | 65.9 -37.7 | 4 +1 | 86 -1.2 | usable | + |
Compare the closest 3 against the GW-1248 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.