Gladen SQX12
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 36.7 Hz |
| Qts | 0.405 |
| Qes | 0.44 |
| Qms | 5.07 |
| Vas | 40.9 L |
| Sd | 490 cm² |
| Xmax | 7 mm |
| Re | 3.2 Ω |
| Bl | 16.1 T·m |
| Mms | 154.8 g |
| Pe | 600 W |
| Sensitivity | 92.6 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Pioneer TS-W307D2 | 33.9 -2.8 | 0.435 +0.03 | 42.2 +1.3 | 7.1 +0.1 | 94.9 +2.3 | close | 2 Ω vs 4 Ω: amp load changes · 400 W vs 600 W: lower power handling | + |
| Celestion FTR12-4080DL/4 | 35.3 -1.4 | 0.428 +0.02 | 51.4 +10.5 | 8 +1 | 92.5 -0.1 | close | + | |
| B&C 12 BG 100 | 39 +2.3 | 0.333 -0.07 | 41 +0.1 | 7.8 +0.8 | 92.4 -0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Dayton Audio TITANIC | 36.3 -0.4 | 0.506 +0.1 | 44 +3.1 | 7.4 +0.4 | 92 -0.6 | close | + | |
| Sica 12 SR 3 CP | 37 +0.3 | 0.4 -0.01 | 60.9 +20 | 8 +1 | 92.2 -0.4 | close | 8 Ω vs 4 Ω: amp load changes · 450 W vs 600 W: lower power handling | + |
| Soundstream SPLX-122 | 35 -1.7 | 0.322 -0.08 | 40.2 -0.7 | 8 +1 | 92 -0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 12RS550 | 42 +5.3 | 0.37 -0.04 | 45.4 +4.5 | 9.25 +2.25 | 93 +0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 12BG100 | 39 +2.3 | 0.33 -0.08 | 41 +0.1 | 10.5 +3.5 | 93 +0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 33K | 38.4 +1.7 | 0.415 +0.01 | 51.1 +10.2 | 5.9 -1.1 | 93.5 +0.9 | close | 400 W vs 600 W: lower power handling · Xmax 5.9 mm < 7 mm: lower excursion-limited SPL | + |
| Massive Audio REBEL 124 | 32.6 -4.1 | 0.485 +0.08 | 38 -2.9 | 7.1 +0.1 | 92.4 -0.2 | close | 2 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the SQX12 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.