Fonestar FPW 350
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 52 Hz |
| Qts | 0.876 |
| Qes | 1.1 |
| Qms | 4.3 |
| Vas | 65 L |
| Sd | 550 cm² |
| Xmax | 3.7 mm |
| Re | 7 Ω |
| Bl | 11.3 T·m |
| Mms | 61.1 g |
| Pe | 175 W |
| Sensitivity | 91.8 dB |
Alignment hint
| EBP | 47 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Siare 31TE vp | 53.4 +1.4 | 0.746 -0.13 | 62 -3 | 4.1 +0.4 | 93.8 +2 | close | 120 W vs 175 W: lower power handling | + |
| Mercuriale PTR 306 M0 | 58 +6 | 0.808 -0.07 | 70.1 +5.1 | 3.9 +0.2 | 94.6 +2.8 | close | + | |
| Technysound TS 30/300 | 48.6 -3.4 | 0.663 -0.21 | 65 = | 4 +0.3 | 92.1 +0.3 | usable | + | |
| Visaton WS32AW | 45 -7 | 0.857 -0.02 | 47 -18 | 3.7 = | 88.9 -2.9 | usable | + | |
| Fountek FW300DV vp 2 aimants | 46.3 -5.7 | 0.885 +0.01 | 43 -22 | 4.2 +0.5 | 88.4 -3.4 | usable | + | |
| Fane 12-100TC | 56 +4 | 0.779 -0.1 | 56.1 -8.9 | 2.5 -1.2 | 93.5 +1.7 | usable | 100 W vs 175 W: lower power handling · Xmax 2.5 mm < 3.7 mm: lower excursion-limited SPL | + |
| Fane 12-250TC SOVEREIGN | 50 -2 | 0.658 -0.22 | 78.1 +13.1 | 3.5 -0.2 | 93.8 +2 | usable | Xmax 3.5 mm < 3.7 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 12-250TC | 50 -2 | 0.658 -0.22 | 78.1 +13.1 | 3.5 -0.2 | 93.8 +2 | usable | Xmax 3.5 mm < 3.7 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 12-200LT | 50 -2 | 0.655 -0.22 | 78.1 +13.1 | 5.3 +1.6 | 93.8 +2 | usable | + | |
| Celestion TF 1215 | 62 +10 | 0.857 -0.02 | 69 +4 | 2.5 -1.2 | 96.2 +4.4 | usable | Xmax 2.5 mm < 3.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the FPW 350 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.