Focal ACCESS 27A
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 41.3 Hz |
| Qts | 0.48 |
| Qes | 0.54 |
| Qms | 4.35 |
| Vas | 21.2 L |
| Sd | 330.1 cm² |
| Xmax | 5 mm |
| Re | 2.9 Ω |
| Bl | 12.2 T·m |
| Mms | 106.9 g |
| Pe | 250 W |
| Sensitivity | 90.8 dB |
Alignment hint
| EBP | 76 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 18.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Focal 27 V1 | 39 -2.3 | 0.445 -0.03 | 21.4 +0.2 | 4.9 -0.1 | 90.4 -0.4 | close | Xmax 4.9 mm < 5 mm: lower excursion-limited SPL | + |
| Focal 11V 5552 | 40.5 -0.8 | 0.497 +0.02 | 24.1 +2.9 | 4.6 -0.4 | 90.8 = | close | 175 W vs 250 W: lower power handling · Xmax 4.6 mm < 5 mm: lower excursion-limited SPL | + |
| Auditor 250 P | 38.7 -2.6 | 0.454 -0.03 | 24.8 +3.6 | 5 = | 90.3 -0.5 | close | + | |
| hertz Hertz Audio HX250 | 37 -4.3 | 0.444 -0.04 | 24 +2.8 | 5.3 +0.3 | 90.3 -0.5 | close | + | |
| Focal SUB25KXE | 38 -3.3 | 0.52 +0.04 | 20 -1.2 | 8.2 +3.2 | 91.7 +0.9 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Oxygen AIR2 250 | 36.4 -4.9 | 0.502 +0.02 | 22.4 +1.2 | 5.8 +0.8 | 88.3 -2.5 | close | + | |
| Focal 11W 7670 | 44.6 +3.3 | 0.45 -0.03 | 22.9 +1.7 | 4.2 -0.8 | 92.1 +1.3 | close | 175 W vs 250 W: lower power handling · Xmax 4.2 mm < 5 mm: lower excursion-limited SPL | + |
| Pioneer TS-W257D4 DVC | 39.7 -1.6 | 0.546 +0.07 | 18.2 -3 | 5.3 +0.3 | 92.2 +1.4 | close | 2 Ω vs 4 Ω: amp load changes | + |
| LaVoce SSF102.50L | 50 +8.7 | 0.475 -0.01 | 25.6 +4.4 | 5.7 +0.7 | 91.4 +0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 27 V2 | 38.5 -2.8 | 0.629 +0.15 | 21.3 +0.1 | 5.5 +0.5 | 90.1 -0.7 | usable | + |
Compare the closest 3 against the ACCESS 27A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.