Focal 690 CVX
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 60.3 Hz |
| Qts | 0.693 |
| Qes | 0.76 |
| Qms | 7.91 |
| Vas | 59.5 L |
| Sd | 346.4 cm² |
| Xmax | 2.5 mm |
| Re | 3.59 Ω |
| Bl | 5.9 T·m |
| Mms | 19.7 g |
| Pe | 80 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 79 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1446.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10FE200 | 55 -5.3 | 0.69 = | 61.7 +2.2 | 4.67 +2.17 | 96 -1.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 10FE200 v2014 | 55 -5.3 | 0.695 = | 53.4 -6.1 | 4.7 +2.2 | 94.1 -3.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Wharfedale D-002 | 71.3 +11 | 0.624 -0.07 | 50.8 -8.7 | 4 +1.5 | 98.2 +0.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma PRO CM10 | 60 -0.3 | 0.594 -0.1 | 49.6 -9.9 | 4.2 +1.7 | 95.3 -2.5 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Ciare HX255 GR vp | 55.3 -5 | 0.569 -0.12 | 57.4 -2.1 | 4 +1.5 | 95.4 -2.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Fenton PS10 | 60 -0.3 | 0.684 -0.01 | 41.2 -18.3 | 4 +1.5 | 93.1 -4.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Fane 10-125 | 55 -5.3 | 0.638 -0.05 | 50.6 -8.9 | 4.7 +2.2 | 93.6 -4.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence BETA-10A | 53 -7.3 | 0.49 -0.2 | 60.1 +0.6 | 3 +0.5 | 97 -0.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Fane SOVEREIGN 10-125 v2 | 55 -5.3 | 0.638 -0.05 | 50 -9.5 | 4.6 +2.1 | 93.5 -4.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Siemens C 71233-4A-A1 | 70.2 +9.9 | 0.546 -0.15 | 58.6 -0.9 | 4 +1.5 | 95.1 -2.7 | usable | 16 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 690 CVX →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.