Focal 10V1

10" · 4 Ω · 150 W · 93.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	49.7 Hz
Qts	0.822
Qes	0.94
Qms	6.53
Vas	42.5 L
Sd	346.4 cm²
Xmax	4.9 mm
Re	3 Ω
Bl	6.4 T·m
Mms	40.6 g
Pe	150 W
Sensitivity	93.7 dB

Alignment hint

EBP	53 · flexible
Sealed Vb (Qtc ≈ 0.71)	Qts too high

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Focal 11V 5451	48.6 -1.1	0.825 =	39 -3.5	5.1 +0.2	93 -0.7	close		+
Focal 27 F	43.7 -6	0.82 =	45.5 +3	5.8 +0.9	92.8 -0.9	close		+
Audax HT240G0	48.9 -0.8	0.672 -0.15	35.8 -6.7	5.5 +0.6	94 +0.3	usable		+
Dayton Audio PA255-8 v2017	50.5 +0.8	0.612 -0.21	41.2 -1.3	5 +0.1	92.7 -1	usable	8 Ω vs 4 Ω: amp load changes	+
MTX Audio RTX108	58.7 +9	0.727 -0.09	37.1 -5.4	5.7 +0.8	93.5 -0.2	usable	8 Ω vs 4 Ω: amp load changes	+
Focal 10C 5401	56.5 +6.8	0.796 -0.03	43.1 +0.6	3.2 -1.7	94.6 +0.9	usable	60 W vs 150 W: lower power handling · Xmax 3.2 mm < 4.9 mm: lower excursion-limited SPL	+
Fonestar FPW 250	55 +5.3	0.825 =	38 -4.5	3.9 -1	90.6 -3.1	usable	8 Ω vs 4 Ω: amp load changes · Xmax 3.9 mm < 4.9 mm: lower excursion-limited SPL	+
Focal 11V 5442	51.1 +1.4	0.663 -0.16	33.3 -9.2	4.9 =	93.9 +0.2	usable		+
Focal 270 V	51.1 +1.4	0.663 -0.16	33.3 -9.2	5.5 +0.6	93.9 +0.2	usable		+
Faital PRO 10FE200 v2014	55 +5.3	0.695 -0.13	53.4 +10.9	4.7 -0.2	94.1 +0.4	usable	8 Ω vs 4 Ω: amp load changes · Xmax 4.7 mm < 4.9 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10V1 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.