Focal 10C01-T

10" · 8 Ω · 60 W · 95.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	29 Hz
Qts	0.237
Qes	0.258
Qms	2.964
Vas	175.6 L
Sd	343 cm²
Xmax	5.5 mm
Re	6 Ω
Bl	10.9 T·m
Mms	28.3 g
Pe	60 W
Sensitivity	95.4 dB

Alignment hint

EBP	112 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 22.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Focal 10C01 v2	29 =	0.239 =	176.6 +1	5.5 =	95.4 =	close		+
Audax HIF24HSMC-4CA12 v2	27 -2	0.243 +0.01	179.6 +4	5 -0.5	94 -1.4	close	40 W vs 60 W: lower power handling · Xmax 5 mm < 5.5 mm: lower excursion-limited SPL	+
SEAS 25F-EWX	26 -3	0.23 -0.01	175 -0.6	8 +2.5	92.9 -2.5	close		+
SEAS 25F-EWX 8	26 -3	0.226 -0.01	175 -0.6	4 -1.5	94.5 -0.9	close	Xmax 4 mm < 5.5 mm: lower excursion-limited SPL	+
SEAS CA25FEY/DD	31 +2	0.28 +0.04	151.7 -23.9	6 +0.5	94.6 -0.8	usable		+
SEAS CA25FEY	31 +2	0.28 +0.04	150.7 -24.9	6 +0.5	94.6 -0.8	usable		+
Audax HD24S45TSM-C-2CA14	27 -2	0.258 +0.02	178 +2.4	4 -1.5	94 -1.4	usable	Xmax 4 mm < 5.5 mm: lower excursion-limited SPL	+
Focal 10K 617	25.1 -3.9	0.242 +0.01	238 +62.4	6 +0.5	95.8 +0.4	usable		+
Tannoy 250/HF/III-L-Z/8/U	26 -3	0.233 =	200 +24.4	4 -1.5	94.7 -0.7	usable	30 W vs 60 W: lower power handling · Xmax 4 mm < 5.5 mm: lower excursion-limited SPL	+
SEAS CA26RE4X vp2	24.8 -4.2	0.273 +0.04	178 +2.4	7.6 +2.1	92.9 -2.5	usable		+

Compare the closest 3 against the 10C01-T →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.