Fenton WPP25
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 43.8 Hz |
| Qts | 0.987 |
| Qes | 1.277 |
| Qms | 4.35 |
| Vas | 32.9 L |
| Sd | 346.4 cm² |
| Xmax | 3.5 mm |
| Re | 7.12 Ω |
| Bl | 10.2 T·m |
| Mms | 67.5 g |
| Pe | 125 W |
| Sensitivity | 85.8 dB |
Alignment hint
| EBP | 34 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sphynx SP-W10-BP | 37.5 -6.3 | 1.025 +0.04 | 39 +6.1 | 3.7 +0.2 | 82.9 -2.9 | usable | + | |
| Eltax MILLENIUM 500 GRAVE vp | 54.6 +10.8 | 0.95 -0.04 | 38 +5.1 | 4.4 +0.9 | 88.7 +2.9 | usable | + | |
| Hertz Audio DS 25.3 | 36 -7.8 | 0.92 -0.07 | 34 +1.1 | 9 +5.5 | 83.3 -2.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| MTX Audio T41012 | 40.1 -3.7 | 0.744 -0.24 | 39.1 +6.2 | 6.2 +2.7 | 86.2 +0.4 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Dynaudio ESOTEC MW182 | 40 -3.8 | 0.64 -0.35 | 34 +1.1 | 4.5 +1 | 86 +0.2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| PAD 12.0033 vp | 40 -3.8 | 0.87 -0.12 | 53 +20.1 | 4 +0.5 | 86.9 +1.1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Pioneer TS-ME100WS | 48 +4.2 | 0.82 -0.17 | 26.9 -6 | 9.6 +6.1 | 84 -1.8 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Pioneer TS-SW2502S4 | 42 -1.8 | 0.97 -0.02 | 18.5 -14.4 | 6.5 +3 | 83 -2.8 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Fenton PS10 vp2 | 59.9 +16.1 | 1.01 +0.02 | 41.2 +8.3 | 3.2 -0.3 | 90.4 +4.6 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 3.2 mm < 3.5 mm: lower excursion-limited SPL | + |
| Fonestar FPW 250 | 55 +11.2 | 0.825 -0.16 | 38 +5.1 | 3.9 +0.4 | 90.6 +4.8 | usable | + |
Compare the closest 3 against the WPP25 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.