Fenton PS10F vp

10" · 16 Ω · 125 W · 93.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	60.1 Hz
Qts	0.586
Qes	0.66
Qms	5.25
Vas	41.2 L
Sd	359 cm²
Xmax	4 mm
Re	8 Ω
Bl	11.9 T·m
Mms	30.8 g
Pe	125 W
Sensitivity	93.3 dB

Alignment hint

EBP	91 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 90.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fenton PS10	60 -0.1	0.684 +0.1	41.2 =	4 =	93.1 -0.2	close	8 Ω vs 16 Ω: amp load changes	+
LaVoce NBASS10-20-32	57 -3.1	0.61 +0.02	44.44 +3.24	6.4 +2.4	94 +0.7	close	32 Ω vs 16 Ω: amp load changes	+
Beyma PRO CM10	60 -0.1	0.594 +0.01	49.6 +8.4	4.2 +0.2	95.3 +2	close	8 Ω vs 16 Ω: amp load changes	+
Dayton Audio PA255-8 v2017	50.5 -9.6	0.612 +0.03	41.2 =	5 +1	92.7 -0.6	close	8 Ω vs 16 Ω: amp load changes	+
Sphynx SP-W10-PRO	50 -10.1	0.579 -0.01	40.7 -0.5	4 =	90.9 -2.4	close		+
Fenton NS10X	67.5 +7.4	0.563 -0.02	40.2 -1	3.8 -0.2	95.6 +2.3	close	8 Ω vs 16 Ω: amp load changes · Xmax 3.8 mm < 4 mm: lower excursion-limited SPL	+
LaVoce NBASS10-20-16	53 -7.1	0.54 -0.05	42.15 +0.95	6.3 +2.3	93 -0.3	close		+
Conrad PA 10 v2016	50.7 -9.4	0.546 -0.04	41.5 +0.3	4 =	91.8 -1.5	close	8 Ω vs 16 Ω: amp load changes	+
Fenton PS10 vp	57.6 -2.5	0.657 +0.07	37.9 -3.3	3.8 -0.2	92.1 -1.2	close	8 Ω vs 16 Ω: amp load changes · Xmax 3.8 mm < 4 mm: lower excursion-limited SPL	+
Conrad PA 10	50.7 -9.4	0.546 -0.04	41.5 +0.3	3.9 -0.1	91.8 -1.5	close	8 Ω vs 16 Ω: amp load changes · Xmax 3.9 mm < 4 mm: lower excursion-limited SPL	+

Compare the closest 3 against the PS10F vp →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.