Fane SOVEREIGN PRO 15-600N
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.222 |
| Qes | 0.234 |
| Qms | 4.33 |
| Vas | 310 L |
| Sd | 855 cm² |
| Xmax | 6.5 mm |
| Re | 5.4 Ω |
| Bl | 19.2 T·m |
| Mms | 76.9 g |
| Pe | 600 W |
| Sensitivity | 100.5 dB |
Alignment hint
| EBP | 141 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 33.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma SM115/K vp2 | 29.8 -3.2 | 0.228 +0.01 | 291 -19 | 8 +1.5 | 99 -1.5 | close | + | |
| Focal AUDIOM 15 | 32.5 -0.5 | 0.236 +0.01 | 379.7 +69.7 | 6 -0.5 | 100.4 -0.1 | close | 225 W vs 600 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Beyma 15P80FE/N | 32 -1 | 0.184 -0.04 | 305 -5 | 8.8 +2.3 | 101 +0.5 | close | + | |
| Beyma 15"P80Fe/N | 32 -1 | 0.18 -0.04 | 305 -5 | 7.5 +1 | 101 +0.5 | close | + | |
| Beyma SM115/K vp1 | 27.6 -5.4 | 0.222 = | 296.7 -13.3 | 8 +1.5 | 98.3 -2.2 | close | + | |
| 18 Sound 15W930 | 33 = | 0.22 = | 240 -70 | 7.5 +1 | 98 -2.5 | close | + | |
| Benett 15.200 X/N | 34.3 +1.3 | 0.211 -0.01 | 338 +28 | 5 -1.5 | 101.2 +0.7 | close | 200 W vs 600 W: lower power handling · Xmax 5 mm < 6.5 mm: lower excursion-limited SPL | + |
| Eminence KAPPA 15 C | 31 -2 | 0.244 +0.02 | 329.9 +19.9 | 5.5 -1 | 101.3 +0.8 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| RCF L 15/541 | 30.9 -2.1 | 0.236 +0.01 | 300 -10 | 5.6 -0.9 | 98.1 -2.4 | close | 200 W vs 600 W: lower power handling · Xmax 5.6 mm < 6.5 mm: lower excursion-limited SPL | + |
| STX W.38.800.4.MC | 27 -6 | 0.219 = | 272 -38 | 8 +1.5 | 99.9 -0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the SOVEREIGN PRO 15-600N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.