Fane SOVEREIGN PRO 15-600

15" · 8 Ω · 600 W · 98.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	15"
Impedance	8 Ω
Fs	38 Hz
Qts	0.351
Qes	0.39
Qms	3.52
Vas	201 L
Sd	850 cm²
Xmax	6.5 mm
Re	5.4 Ω
Bl	17.1 T·m
Mms	88.4 g
Pe	600 W
Sensitivity	98.2 dB

Alignment hint

EBP	97 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 65.7 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
RCF MB 15X301	38 =	0.345 -0.01	195 -6	6 -0.5	98.3 +0.1	close	Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
Beyma 15WRS400	38 =	0.337 -0.01	205.4 +4.4	6.3 -0.2	98.6 +0.4	close	400 W vs 600 W: lower power handling · Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL	+
RCF MB 15N301 (prodance)	40.1 +2.1	0.35 =	203.2 +2.2	6 -0.5	98.8 +0.6	close	Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
Beyma 15CXA400Nd	40 +2	0.358 +0.01	196 -5	6 -0.5	97.9 -0.3	close	400 W vs 600 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
Fane SOVEREIGN PRO 15-600 LF	40 +2	0.364 +0.01	188 -13	6.9 +0.4	97.9 -0.3	close		+
P.Audio S15-100LF	38 =	0.35 =	169.1 -31.9	7.8 +1.3	98 -0.2	close		+
18 Sound 15ND830	39 +1	0.32 -0.03	213 +12	6.5 =	98 -0.2	close	450 W vs 600 W: lower power handling	+
Beyma 15MW/ND	40 +2	0.331 -0.02	207 +6	6.5 =	99.4 +1.2	close	400 W vs 600 W: lower power handling	+
Oberton 15CX	38.2 +0.2	0.349 =	163.8 -37.2	6.8 +0.3	97.8 -0.4	close	450 W vs 600 W: lower power handling	+
P.Audio E15-350N	40 +2	0.359 +0.01	201.4 +0.4	5.3 -1.2	98.2 =	close	350 W vs 600 W: lower power handling · Xmax 5.3 mm < 6.5 mm: lower excursion-limited SPL	+

Compare the closest 3 against the SOVEREIGN PRO 15-600 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.