Fane SOVEREIGN PRO 10M
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 56 Hz |
| Qts | 0.27 |
| Qes | 0.286 |
| Qms | 4.9 |
| Vas | 37 L |
| Sd | 340 cm² |
| Xmax | 2 mm |
| Re | 5.6 Ω |
| Bl | 15.6 T·m |
| Mms | 35.4 g |
| Pe | 300 W |
| Sensitivity | 97.1 dB |
Alignment hint
| EBP | 196 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion CF1025C | 54.8 -1.2 | 0.265 -0.01 | 38.6 +1.6 | 2.5 +0.5 | 97.2 +0.1 | close | + | |
| Ciare PW252 | 55 -1 | 0.264 -0.01 | 43.4 +6.4 | 2.3 +0.3 | 97 -0.1 | close | 150 W vs 300 W: lower power handling | + |
| RCF MB 10N251 | 55 -1 | 0.271 = | 38.8 +1.8 | 4.6 +2.6 | 97.4 +0.3 | close | + | |
| PHL Audio 3001 | 57 +1 | 0.282 +0.01 | 35 -2 | 3.5 +1.5 | 97 -0.1 | close | 200 W vs 300 W: lower power handling | + |
| PHL Audio 3000 | 60 +4 | 0.272 = | 35 -2 | 3.4 +1.4 | 97.8 +0.7 | close | 200 W vs 300 W: lower power handling | + |
| PHL Audio 3430 | 57 +1 | 0.271 = | 41 +4 | 4.2 +2.2 | 97.7 +0.6 | close | + | |
| SICA 10K3PL | 56 = | 0.276 +0.01 | 32.6 -4.4 | 4 +2 | 96.7 -0.4 | close | + | |
| SICA 10 K 3 PL 8 Ohms | 55.9 -0.1 | 0.276 +0.01 | 32.6 -4.4 | 4 +2 | 96.7 -0.4 | close | + | |
| B&C 10 PS 26 (prodance) | 53.4 -2.6 | 0.267 = | 39.5 +2.5 | 5.4 +3.4 | 96.8 -0.3 | close | + | |
| P.Audio E10-200S v2011 | 55.4 -0.6 | 0.272 = | 44.6 +7.6 | 4 +2 | 96.9 -0.2 | close | 200 W vs 300 W: lower power handling | + |
Compare the closest 3 against the SOVEREIGN PRO 10M →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.