Fane SOVEREIGN PRO 10-300SC
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.329 |
| Qes | 0.34 |
| Qms | 10.13 |
| Vas | 45.4 L |
| Sd | 361 cm² |
| Xmax | 4.8 mm |
| Re | 5.5 Ω |
| Bl | 14.8 T·m |
| Mms | 46.1 g |
| Pe | 300 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 138 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 12.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Monacor SP-10/250PRO | 47 = | 0.331 = | 40.7 -4.7 | 4.8 = | 93.3 -1.7 | close | + | |
| Beyma 10MW/ND v2 | 49 +2 | 0.319 -0.01 | 40.7 -4.7 | 6.1 +1.3 | 94.8 -0.2 | close | + | |
| PRV Audio 10MB500 | 50.5 +3.5 | 0.313 -0.02 | 46.2 +0.8 | 4.3 -0.5 | 94.8 -0.2 | close | Xmax 4.3 mm < 4.8 mm: lower excursion-limited SPL | + |
| Beyma 10G40 v2016 | 45 -2 | 0.306 -0.02 | 49 +3.6 | 6.6 +1.8 | 94.5 -0.5 | close | + | |
| Beyma 10"WR300 | 52 +5 | 0.35 +0.02 | 42 -3.4 | 6 +1.2 | 95 = | close | + | |
| Beyma 10"G40 | 45 -2 | 0.3 -0.03 | 49 +3.6 | 7 +2.2 | 95 = | close | + | |
| P.Audio E10-200S v2006 | 53 +6 | 0.337 +0.01 | 46.9 +1.5 | 4.1 -0.7 | 95.1 +0.1 | close | 200 W vs 300 W: lower power handling · Xmax 4.1 mm < 4.8 mm: lower excursion-limited SPL | + |
| Ciare FXE 10-2.5 | 46 -1 | 0.358 +0.03 | 41.6 -3.8 | 6 +1.2 | 93.6 -1.4 | close | + | |
| Beyma 10MW/ND | 49 +2 | 0.32 -0.01 | 40.7 -4.7 | 7.5 +2.7 | 93.5 -1.5 | close | 6 Ω vs 8 Ω: amp load changes | + |
| Beyma 10WR300 | 47 = | 0.287 -0.04 | 50.5 +5.1 | 5.8 +1 | 95.5 +0.5 | close | + |
Compare the closest 3 against the SOVEREIGN PRO 10-300SC →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.