Fane SOVEREIGN PRO 10-300

10" · 8 Ω · 300 W · 97.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	58 Hz
Qts	0.322
Qes	0.34
Qms	6.08
Vas	41 L
Sd	378 cm²
Xmax	4.7 mm
Re	5.7 Ω
Bl	15 T·m
Mms	36.8 g
Pe	300 W
Sensitivity	97.2 dB

Alignment hint

EBP	171 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 10.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fane SOVEREIGN 10-300	58 =	0.313 -0.01	43 +2	4.8 +0.1	97.5 +0.3	close		+
RCF MB 10N251 (prodance)	58.9 +0.9	0.33 +0.01	38.8 -2.2	4.8 +0.1	97.3 +0.1	close		+
Faital PRO 10PR310	55 -3	0.31 -0.01	40.3 -0.7	4.92 +0.22	97 -0.2	close	4 Ω vs 8 Ω: amp load changes	+
SB Audience BIANCO-10MW200	58 =	0.336 +0.01	39.3 -1.7	5.2 +0.5	96.2 -1	close		+
Fane SOVEREIGN 10-275	60 +2	0.343 +0.02	42.4 +1.4	5 +0.3	97.5 +0.3	close		+
PHL Audio 3020	60 +2	0.337 +0.02	41 =	4.1 -0.6	97.6 +0.4	close	200 W vs 300 W: lower power handling · Xmax 4.1 mm < 4.7 mm: lower excursion-limited SPL	+
SICA 10 N 2.5 PL v2017	57 -1	0.357 +0.03	40.9 -0.1	4.5 -0.2	96.5 -0.7	close	Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL	+
Sica 10 N 2.5 PL	57 -1	0.36 +0.04	40.9 -0.1	4.5 -0.2	96.6 -0.6	close	Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL	+
Volt BM251.3 PA	55 -3	0.346 +0.02	44 +3	4.8 +0.1	96.8 -0.4	close	200 W vs 300 W: lower power handling	+
B&C 10NDL64	58 =	0.3 -0.02	34.5 -6.5	4.5 -0.2	97 -0.2	close	16 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 4.7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the SOVEREIGN PRO 10-300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.