Fane SOVEREIGN 15-600LF v2015
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37 Hz |
| Qts | 0.388 |
| Qes | 0.414 |
| Qms | 6.28 |
| Vas | 236 L |
| Sd | 855 cm² |
| Xmax | 6.9 mm |
| Re | 5.4 Ω |
| Bl | 15.6 T·m |
| Mms | 80.3 g |
| Pe | 600 W |
| Sensitivity | 98.3 dB |
Alignment hint
| EBP | 89 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 101.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane SOVEREIGN 15-600LF | 37 = | 0.388 = | 236 = | 6.9 = | 98.3 = | close | + | |
| Beyma SM115/N 8 ohms | 35 -2 | 0.382 -0.01 | 267 +31 | 7.3 +0.4 | 97.5 -0.8 | close | 400 W vs 600 W: lower power handling | + |
| Beyma SM115/N v2015 | 35 -2 | 0.382 -0.01 | 267 +31 | 7.3 +0.4 | 97.5 -0.8 | close | 400 W vs 600 W: lower power handling | + |
| Sica 15 S 3 PL | 33 -4 | 0.38 -0.01 | 230 -6 | 8 +1.1 | 97.2 -1.1 | close | 400 W vs 600 W: lower power handling | + |
| Faital PRO 15FH500A | 35 -2 | 0.394 +0.01 | 217.4 -18.6 | 9 +2.1 | 97.1 -1.2 | close | + | |
| SICA 15 S 3 PL 8 Ohms | 33 -4 | 0.38 -0.01 | 230 -6 | 8 +1.1 | 97.1 -1.2 | close | 400 W vs 600 W: lower power handling | + |
| Focal 15PR75-200 | 36 -1 | 0.382 -0.01 | 224 -12 | 5.7 -1.2 | 97.4 -0.9 | close | 200 W vs 600 W: lower power handling · Xmax 5.7 mm < 6.9 mm: lower excursion-limited SPL | + |
| 18 Sound 15W750 | 39 +2 | 0.37 -0.02 | 218 -18 | 8 +1.1 | 97 -1.3 | close | + | |
| 18 Sound 15ND930 | 38 +1 | 0.39 = | 195 -41 | 7.5 +0.6 | 97 -1.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 15FH520 | 36 -1 | 0.39 = | 186.5 -49.5 | 8.75 +1.85 | 98 -0.3 | close | + |
Compare the closest 3 against the SOVEREIGN 15-600LF v2015 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.