Fane SOVEREIGN 15-400 LF
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 41 Hz |
| Qts | 0.573 |
| Qes | 0.62 |
| Qms | 7.6 |
| Vas | 210 L |
| Sd | 855.3 cm² |
| Xmax | 5 mm |
| Re | 5.8 Ω |
| Bl | 13.3 T·m |
| Mms | 73.6 g |
| Pe | 400 W |
| Sensitivity | 97.1 dB |
Alignment hint
| EBP | 66 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 401.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane 15-400LF v2016 | 41 = | 0.573 = | 210 = | 5 = | 97.1 = | close | + | |
| Fane 15-400LF | 39 -2 | 0.577 = | 210 = | 5 = | 96.1 -1 | close | + | |
| Eminence DELTA 15 LF | 41 = | 0.584 +0.01 | 186.1 -23.9 | 6 +1 | 96 -1.1 | close | + | |
| DAS Audio 15LM | 40.4 -0.6 | 0.49 -0.08 | 206.6 -3.4 | 5 = | 97.1 = | close | + | |
| Supravox 380-2000 LC | 38.7 -2.3 | 0.568 -0.01 | 272.2 +62.2 | 5 = | 97.3 +0.2 | close | 120 W vs 400 W: lower power handling | + |
| JB Systems PWX15-300 | 40.1 -0.9 | 0.552 -0.02 | 169.9 -40.1 | 5 = | 96 -1.1 | close | 300 W vs 400 W: lower power handling | + |
| LaVoce WSF152.02 | 43 +2 | 0.527 -0.05 | 210 = | 4.3 -0.7 | 98.3 +1.2 | close | 200 W vs 400 W: lower power handling · Xmax 4.3 mm < 5 mm: lower excursion-limited SPL | + |
| P.Audio BM-15W | 39.8 -1.2 | 0.473 -0.1 | 200.1 -9.9 | 5 = | 96.4 -0.7 | close | + | |
| LaVoce FBASS15-20 | 40 -1 | 0.53 -0.04 | 234.41 +24.41 | 4.3 -0.7 | 98 +0.9 | close | 200 W vs 400 W: lower power handling · Xmax 4.3 mm < 5 mm: lower excursion-limited SPL | + |
| Realistic PRO 250 vp | 47.3 +6.3 | 0.619 +0.05 | 196.6 -13.4 | 5.5 +0.5 | 97.9 +0.8 | close | 250 W vs 400 W: lower power handling | + |
Compare the closest 3 against the SOVEREIGN 15-400 LF →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.