Fane SOVEREIGN 12-300
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50 Hz |
| Qts | 0.389 |
| Qes | 0.41 |
| Qms | 7.48 |
| Vas | 103.6 L |
| Sd | 525.9 cm² |
| Xmax | 4.5 mm |
| Re | 5.7 Ω |
| Bl | 12.9 T·m |
| Mms | 37.9 g |
| Pe | 300 W |
| Sensitivity | 98.4 dB |
Alignment hint
| EBP | 122 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 45 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 12PR300 | 50 = | 0.36 -0.03 | 92.6 -11 | 4.92 +0.42 | 99 +0.6 | close | + | |
| MCM Electronics 55-2962 | 48 -2 | 0.391 = | 94.5 -9.1 | 4.8 +0.3 | 96.3 -2.1 | close | 175 W vs 300 W: lower power handling | + |
| LaVoce WSF122.02 | 50 = | 0.404 +0.02 | 88 -15.6 | 4.3 -0.2 | 97.7 -0.7 | close | 200 W vs 300 W: lower power handling · Xmax 4.3 mm < 4.5 mm: lower excursion-limited SPL | + |
| 18 Sound 12W500 | 49 -1 | 0.35 -0.04 | 101 -2.6 | 4 -0.5 | 98.5 +0.1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 12-300 v2014 | 46 -4 | 0.35 -0.04 | 110 +6.4 | 4.5 = | 98 -0.4 | close | + | |
| Beyma 12LW30 | 45 -5 | 0.404 +0.02 | 110 +6.4 | 5 +0.5 | 97 -1.4 | close | + | |
| Ciare PW321 | 52 +2 | 0.385 = | 114 +10.4 | 3.5 -1 | 98.7 +0.3 | close | 150 W vs 300 W: lower power handling · Xmax 3.5 mm < 4.5 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN PRO 12-300 | 46 -4 | 0.35 -0.04 | 114 +10.4 | 4.5 = | 98.1 -0.3 | close | + | |
| Beyma SM212 v2018 | 43 -7 | 0.381 -0.01 | 103 -0.6 | 7 +2.5 | 96.6 -1.8 | close | + | |
| Faital PRO 12PR330 | 50 = | 0.4 +0.01 | 79.1 -24.5 | 7.37 +2.87 | 98 -0.4 | close | + |
Compare the closest 3 against the SOVEREIGN 12-300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.