Fane SOVEREIGN 10-300

10" · 8 Ω · 300 W · 97.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	58 Hz
Qts	0.313
Qes	0.33
Qms	6.08
Vas	43 L
Sd	378 cm²
Xmax	4.8 mm
Re	5.7 Ω
Bl	14.9 T·m
Mms	35.1 g
Pe	300 W
Sensitivity	97.5 dB

Alignment hint

EBP	176 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 10.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fane SOVEREIGN PRO 10-300	58 =	0.322 +0.01	41 -2	4.7 -0.1	97.2 -0.3	close	Xmax 4.7 mm < 4.8 mm: lower excursion-limited SPL	+
Faital PRO 10PR310	55 -3	0.31 =	40.3 -2.7	4.92 +0.12	97 -0.5	close	4 Ω vs 8 Ω: amp load changes	+
Fane SOVEREIGN 10-275	60 +2	0.343 +0.03	42.4 -0.6	5 +0.2	97.5 =	close		+
RCF MB 10N251 (prodance)	58.9 +0.9	0.33 +0.02	38.8 -4.2	4.8 =	97.3 -0.2	close		+
Faital PRO 10PR300	60 +2	0.28 -0.03	42.2 -0.8	4.92 +0.12	98 +0.5	close		+
Volt BM251.3 PA	55 -3	0.346 +0.03	44 +1	4.8 =	96.8 -0.7	close	200 W vs 300 W: lower power handling	+
SB Audience BIANCO-10MW200	58 =	0.336 +0.02	39.3 -3.7	5.2 +0.4	96.2 -1.3	close		+
PHL Audio 3020	60 +2	0.337 +0.02	41 -2	4.1 -0.7	97.6 +0.1	close	200 W vs 300 W: lower power handling · Xmax 4.1 mm < 4.8 mm: lower excursion-limited SPL	+
18 Sound 10W500	53 -5	0.29 -0.02	45.2 +2.2	5.5 +0.7	98 +0.5	close		+
Oberton 10NMB200	58.67 +0.67	0.316 =	34.93 -8.07	4.25 -0.55	98 +0.5	close	200 W vs 300 W: lower power handling · Xmax 4.25 mm < 4.8 mm: lower excursion-limited SPL	+

Compare the closest 3 against the SOVEREIGN 10-300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.