Fane COLOSSUS PRIME 18XS
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.385 |
| Qes | 0.404 |
| Qms | 8.2 |
| Vas | 257 L |
| Sd | 1209 cm² |
| Xmax | 12 mm |
| Re | 5.2 Ω |
| Bl | 22.4 T·m |
| Mms | 188 g |
| Pe | 1200 W |
| Sensitivity | 95.4 dB |
Alignment hint
| EBP | 82 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 108.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 18FX800 | 34 +1 | 0.4 +0.02 | 247 -10 | 13.8 +1.8 | 96 +0.6 | close | + | |
| Beyma 18LEX1000Nd | 34 +1 | 0.39 +0.01 | 260 +3 | 11 -1 | 98 +2.6 | close | Xmax 11 mm < 12 mm: lower excursion-limited SPL | + |
| Beyma 18LEX1000Fe | 34 +1 | 0.38 -0.01 | 250 -7 | 11 -1 | 98 +2.6 | close | Xmax 11 mm < 12 mm: lower excursion-limited SPL | + |
| Beyma 18LEX1200FE | 32 -1 | 0.378 -0.01 | 277 +20 | 11 -1 | 97.4 +2 | close | Xmax 11 mm < 12 mm: lower excursion-limited SPL | + |
| Beyma 18"LEX1600Nd | 33 = | 0.43 +0.04 | 231 -26 | 14.5 +2.5 | 96 +0.6 | close | + | |
| Dayton Audio APOLLO 18F | 32 -1 | 0.401 +0.02 | 287.7 +30.7 | 10.6 -1.4 | 96.4 +1 | close | Xmax 10.6 mm < 12 mm: lower excursion-limited SPL | + |
| Beyma 18LEX1000/Nd | 34 +1 | 0.391 +0.01 | 260 +3 | 9.4 -2.6 | 97.8 +2.4 | close | Xmax 9.4 mm < 12 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN PRO 18-800 P | 33 = | 0.386 = | 258 +1 | 7.5 -4.5 | 96.4 +1 | close | 800 W vs 1200 W: lower power handling · Xmax 7.5 mm < 12 mm: lower excursion-limited SPL | + |
| Faital PRO 18HW1070 | 32 -1 | 0.38 -0.01 | 195.9 -61.1 | 13 +1 | 97 +1.6 | close | + | |
| BMS 18N850vv2 | 29.8 -3.2 | 0.33 -0.05 | 243 -14 | 12 = | 95 -0.4 | close | + |
Compare the closest 3 against the COLOSSUS PRIME 18XS →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.