Fane COLOSSUS 18B
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30.5 Hz |
| Qts | 0.197 |
| Qes | 0.207 |
| Qms | 4.03 |
| Vas | 320 L |
| Sd | 1120 cm² |
| Xmax | 4 mm |
| Re | 6.35 Ω |
| Bl | 29.7 T·m |
| Mms | 149.6 g |
| Pe | 400 W |
| Sensitivity | 99.4 dB |
Alignment hint
| EBP | 147 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL 2243H | 30 -0.5 | 0.192 -0.01 | 338.1 +18.1 | 4.3 +0.3 | 100.4 +1 | close | 300 W vs 400 W: lower power handling | + |
| Celestion BX18-4085 | 30 -0.5 | 0.2 = | 337 +17 | 3.4 -0.6 | 99.8 +0.4 | close | 150 W vs 400 W: lower power handling · Xmax 3.4 mm < 4 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18 BASS | 28 -2.5 | 0.188 -0.01 | 366 +46 | 3.8 -0.2 | 99.2 -0.2 | close | 200 W vs 400 W: lower power handling · Xmax 3.8 mm < 4 mm: lower excursion-limited SPL | + |
| Radian 2218 NEO SUBWOOFER | 28.9 -1.6 | 0.219 +0.02 | 333 +13 | 6.3 +2.3 | 98.9 -0.5 | close | + | |
| JBL E155-8 | 30 -0.5 | 0.2 = | 424.8 +104.8 | 5.1 +1.1 | 100.4 +1 | close | 300 W vs 400 W: lower power handling | + |
| Radian 2218Neo | 30 -0.5 | 0.23 +0.03 | 312 -8 | 9 +5 | 99 -0.4 | close | + | |
| PD PD 184C01 | 30 -0.5 | 0.227 +0.03 | 337.1 +17.1 | 7.8 +3.8 | 100.2 +0.8 | close | + | |
| Precision Devices PD 184C01 | 30 -0.5 | 0.227 +0.03 | 337.1 +17.1 | 7.8 +3.8 | 100.2 +0.8 | close | + | |
| Monacor SPA-46 | 30 -0.5 | 0.25 +0.05 | 285 -35 | 4 = | 99.8 +0.4 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| Oberton 18NSW700-8 | 30.5 = | 0.243 +0.05 | 309 -11 | 7.7 +3.7 | 98.6 -0.8 | close | + |
Compare the closest 3 against the COLOSSUS 18B →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.