Fane COLOSSUS 18-1500
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33.5 Hz |
| Qts | 0.25 |
| Qes | 0.259 |
| Qms | 6.99 |
| Vas | 175 L |
| Sd | 1178 cm² |
| Xmax | 8.1 mm |
| Re | 5.3 Ω |
| Bl | 32.9 T·m |
| Mms | 250.9 g |
| Pe | 1500 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 129 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD.185N02 | 35.2 +1.7 | 0.24 -0.01 | 178.28 +3.28 | 12 +3.9 | 96.8 -1 | close | 1100 W vs 1500 W: lower power handling | + |
| Oberton 18XB1300 | 35.2 +1.7 | 0.287 +0.04 | 170.9 -4.1 | 8 -0.1 | 97.8 = | close | Xmax 8 mm < 8.1 mm: lower excursion-limited SPL | + |
| Beyma 18QLEX1600Fe | 31 -2.5 | 0.25 = | 177.2 +2.2 | 13 +4.9 | 96 -1.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 18DS100 | 32 -1.5 | 0.24 -0.01 | 157 -18 | 14 +5.9 | 98 +0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Precision Devices PD.1850/2 | 33.1 -0.4 | 0.24 -0.01 | 203.84 +28.84 | 11.1 +3 | 96.7 -1.1 | close | 800 W vs 1500 W: lower power handling | + |
| Oberton 18XB1301 | 35.7 +2.2 | 0.302 +0.05 | 172.9 -2.1 | 8.2 +0.1 | 97.9 +0.1 | close | + | |
| 18 Sound 18NLW9600 | 34 +0.5 | 0.281 +0.03 | 149 -26 | 9 +0.9 | 97.3 -0.5 | close | + | |
| Beyma 18QLEX1600/Fe | 30 -3.5 | 0.231 -0.02 | 195 +20 | 8.3 +0.2 | 97.2 -0.6 | close | + | |
| Precision Devices PD.185C003-8 | 33 -0.5 | 0.24 -0.01 | 224 +49 | 11 +2.9 | 97.3 -0.5 | close | 1000 W vs 1500 W: lower power handling | + |
| B&C 18 NW 100 v2019 | 30 -3.5 | 0.268 +0.02 | 203.5 +28.5 | 8.3 +0.2 | 98.3 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the COLOSSUS 18-1500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.