Fane COLOSSUS 15XBN
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.279 |
| Qes | 0.29 |
| Qms | 7.48 |
| Vas | 168 L |
| Sd | 855.3 cm² |
| Xmax | 7.5 mm |
| Re | 6.2 Ω |
| Bl | 23.4 T·m |
| Mms | 107.1 g |
| Pe | 800 W |
| Sensitivity | 98.1 dB |
Alignment hint
| EBP | 131 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 31 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15ND940 | 38 = | 0.28 = | 174 +6 | 9.5 +2 | 99 +0.9 | close | 600 W vs 800 W: lower power handling | + |
| BMS 15N830V2 v2015 | 37 -1 | 0.271 -0.01 | 159 -9 | 7.5 = | 98.6 +0.5 | close | + | |
| B&C 15PS76-8 | 38 = | 0.26 -0.02 | 164 -4 | 7.5 = | 99 +0.9 | close | 550 W vs 800 W: lower power handling | + |
| 18 Sound 15NLW9300 v2015 | 39 +1 | 0.263 -0.02 | 170 +2 | 7.2 -0.3 | 98.9 +0.8 | close | Xmax 7.2 mm < 7.5 mm: lower excursion-limited SPL | + |
| BMS 15N830V2 | 39.5 +1.5 | 0.27 -0.01 | 159 -9 | 8 +0.5 | 97.1 -1 | close | 6 Ω vs 8 Ω: amp load changes · 550 W vs 800 W: lower power handling | + |
| 18 Sound 15NLW9300 | 39 +1 | 0.26 -0.02 | 170 +2 | 8 +0.5 | 97 -1.1 | close | + | |
| 18 Sound 15ND940 | 39 +1 | 0.26 -0.02 | 170 +2 | 9.5 +2 | 99 +0.9 | close | 4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| B&C 15NDL88 | 41 +3 | 0.28 = | 154 -14 | 8 +0.5 | 99 +0.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
| JBL 2255H | 39 +1 | 0.303 +0.02 | 170 +2 | 7.1 -0.4 | 98.9 +0.8 | close | Xmax 7.1 mm < 7.5 mm: lower excursion-limited SPL | + |
| Faital PRO 15FX560 | 38 = | 0.3 +0.02 | 159 -9 | 9.42 +1.92 | 99 +0.9 | close | + |
Compare the closest 3 against the COLOSSUS 15XBN →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.