Fane 18-800N
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.306 |
| Qes | 0.325 |
| Qms | 5.27 |
| Vas | 217 L |
| Sd | 1133 cm² |
| Xmax | 7.1 mm |
| Re | 5.2 Ω |
| Bl | 23.6 T·m |
| Mms | 145.5 g |
| Pe | 800 W |
| Sensitivity | 99.5 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 50 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF L 18P300 4 Ohms | 34 -4 | 0.305 = | 213 -4 | 7.8 +0.7 | 99.9 +0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| PD PD 185N002 | 36 -2 | 0.297 -0.01 | 226 +9 | 7.8 +0.7 | 98.7 -0.8 | close | + | |
| Precision Devices PD 185N002 | 36 -2 | 0.297 -0.01 | 226 +9 | 7.8 +0.7 | 98.7 -0.8 | close | + | |
| RCF LF 18H400 | 38 = | 0.321 +0.02 | 250 +33 | 7.4 +0.3 | 100.3 +0.8 | close | + | |
| Monacor SP-18/1000HP | 35 -3 | 0.282 -0.02 | 219 +2 | 7.9 +0.8 | 98.8 -0.7 | close | + | |
| RCF L 18S800 | 39 +1 | 0.29 -0.02 | 206 -11 | 6.3 -0.8 | 100.2 +0.7 | close | Xmax 6.3 mm < 7.1 mm: lower excursion-limited SPL | + |
| RCF L 18S801 | 39 +1 | 0.29 -0.02 | 206 -11 | 6.3 -0.8 | 100.2 +0.7 | close | Xmax 6.3 mm < 7.1 mm: lower excursion-limited SPL | + |
| Beyma 18G50 | 40 +2 | 0.321 +0.02 | 212 -5 | 6 -1.1 | 99.3 -0.2 | close | Xmax 6 mm < 7.1 mm: lower excursion-limited SPL | + |
| Precision Devices PD188 | 37.409 -0.59 | 0.28 -0.03 | 224.419 +7.42 | 9.5 +2.4 | 98.5 -1 | close | 600 W vs 800 W: lower power handling | + |
| B&C 18 TBX 46 v2 | 34 -4 | 0.311 +0.01 | 227 +10 | 8.1 +1 | 98.2 -1.3 | close | + |
Compare the closest 3 against the 18-800N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.