Fane 18-500 TLHP
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 29 Hz |
| Qts | 0.403 |
| Qes | 0.43 |
| Qms | 6.43 |
| Vas | 521 L |
| Sd | 1178.4 cm² |
| Xmax | 6.3 mm |
| Re | 5.7 Ω |
| Bl | 16.5 T·m |
| Mms | 112.5 g |
| Pe | 500 W |
| Sensitivity | 98.2 dB |
Alignment hint
| EBP | 67 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 250.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Dibeisi PS1805-8 | 27.1 -1.9 | 0.4 = | 473.8 -47.2 | 7 +0.7 | 96.1 -2.1 | close | 250 W vs 500 W: lower power handling | + |
| Beyma 18LX60 | 27 -2 | 0.368 -0.04 | 500 -21 | 9 +2.7 | 97.7 -0.5 | close | + | |
| Celestion G18-200 | 29.6 +0.6 | 0.364 -0.04 | 518.5 -2.5 | 5 -1.3 | 97.9 -0.3 | close | 200 W vs 500 W: lower power handling · Xmax 5 mm < 6.3 mm: lower excursion-limited SPL | + |
| Beyma SM118 | 30 +1 | 0.421 +0.02 | 430 -91 | 5.5 -0.8 | 97.2 -1 | close | Xmax 5.5 mm < 6.3 mm: lower excursion-limited SPL | + |
| Eminence KAPPA 18 A | 28 -1 | 0.408 = | 475.5 -45.5 | 4.8 -1.5 | 95.9 -2.3 | close | Xmax 4.8 mm < 6.3 mm: lower excursion-limited SPL | + |
| SB Audience BIANCO-18SW450 v2020 | 27 -2 | 0.375 -0.03 | 423 -98 | 9 +2.7 | 97.2 -1 | usable | + | |
| Mach 5 Audio MAC MAH CWA46 | 27 -2 | 0.448 +0.04 | 470.3 -50.7 | 10 +3.7 | 96.2 -2 | usable | + | |
| McCauley 6260-8 | 28 -1 | 0.379 -0.02 | 391 -130 | 8 +1.7 | 96.7 -1.5 | usable | + | |
| Eminence DELTA PRO 18 A | 26 -3 | 0.32 -0.08 | 493.2 -27.8 | 6.7 +0.4 | 98 -0.2 | usable | + | |
| Carvin PS18-8 | 35 +6 | 0.48 +0.08 | 531.785 +10.78 | 6 -0.3 | 97.7 -0.5 | usable | Xmax 6 mm < 6.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18-500 TLHP →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.