Fane 12-300 vp FRL
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50 Hz |
| Qts | 0.39 |
| Qes | 0.411 |
| Qms | 7.75 |
| Vas | 62 L |
| Sd | 532 cm² |
| Xmax | 4.5 mm |
| Re | 5.75 Ω |
| Bl | 16.9 T·m |
| Mms | 64.8 g |
| Pe | 300 W |
| Sensitivity | 96.2 dB |
Alignment hint
| EBP | 122 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 27.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 12PR300-4 | 50 = | 0.392 = | 63.1 +1.1 | 4.9 +0.4 | 98.8 +2.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSN122.50-16 | 53 +3 | 0.4 +0.01 | 65.84 +3.84 | 4.6 +0.1 | 96.5 +0.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| SB Audience BIANCO-12MW200 | 50 = | 0.389 = | 68.7 +6.7 | 6 +1.5 | 97.2 +1 | close | + | |
| Faital PRO 12HX500 | 54 +4 | 0.396 +0.01 | 62.3 +0.3 | 5.5 +1 | 97.2 +1 | close | + | |
| Faital PRO 12PR310-8 | 54 +4 | 0.396 +0.01 | 62.8 +0.8 | 4.9 +0.4 | 97.5 +1.3 | close | + | |
| P.Audio WN-12R | 50.3 +0.3 | 0.37 -0.02 | 68.7 +6.7 | 4.5 = | 97.2 +1 | close | + | |
| Fane COLOSSUS 12MBN | 55 +5 | 0.396 +0.01 | 63 +1 | 5.5 +1 | 97.4 +1.2 | close | + | |
| P.Audio SN-12LF | 48 -2 | 0.399 +0.01 | 67.9 +5.9 | 7.2 +2.7 | 96 -0.2 | close | + | |
| Faital PRO 12PR300 | 50 = | 0.41 +0.02 | 73.9 +11.9 | 4.92 +0.42 | 97 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Alpine 6012CX | 44 -6 | 0.415 +0.02 | 59.5 -2.5 | 4.6 +0.1 | 96.5 +0.3 | close | 4 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
Compare the closest 3 against the 12-300 vp FRL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.