Fane 10-125

10" · 8 Ω · 125 W · 93.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	55 Hz
Qts	0.638
Qes	0.71
Qms	6.29
Vas	50.6 L
Sd	363 cm²
Xmax	4.7 mm
Re	6.6 Ω
Bl	9.9 T·m
Mms	30.6 g
Pe	125 W
Sensitivity	93.6 dB

Alignment hint

EBP	77 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 221.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fane SOVEREIGN 10-125 v2	55 =	0.638 =	50 -0.6	4.6 -0.1	93.5 -0.1	close	Xmax 4.6 mm < 4.7 mm: lower excursion-limited SPL	+
Faital PRO 10FE200 v2014	55 =	0.695 +0.06	53.4 +2.8	4.7 =	94.1 +0.5	close		+
LaVoce NBASS10-20-32	57 +2	0.61 -0.03	44.44 -6.16	6.4 +1.7	94 +0.4	close	32 Ω vs 8 Ω: amp load changes	+
Beyma PRO CM10	60 +5	0.594 -0.04	49.6 -1	4.2 -0.5	95.3 +1.7	close	Xmax 4.2 mm < 4.7 mm: lower excursion-limited SPL	+
Dayton Audio PA255-8 v2017	50.5 -4.5	0.612 -0.03	41.2 -9.4	5 +0.3	92.7 -0.9	close		+
Faital PRO 10FE200	55 =	0.69 +0.05	61.7 +11.1	4.67 -0.03	96 +2.4	close	Xmax 4.67 mm < 4.7 mm: lower excursion-limited SPL	+
Ciare HX255 GR vp	55.3 +0.3	0.569 -0.07	57.4 +6.8	4 -0.7	95.4 +1.8	usable	Xmax 4 mm < 4.7 mm: lower excursion-limited SPL	+
Fenton PS10	60 +5	0.684 +0.05	41.2 -9.4	4 -0.7	93.1 -0.5	usable	Xmax 4 mm < 4.7 mm: lower excursion-limited SPL	+
LaVoce NBASS10-20-16	53 -2	0.54 -0.1	42.15 -8.45	6.3 +1.6	93 -0.6	usable	16 Ω vs 8 Ω: amp load changes	+
Fenton PS10F vp	60.1 +5.1	0.586 -0.05	41.2 -9.4	4 -0.7	93.3 -0.3	usable	16 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10-125 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.