← all drivers

Faital PRO HF10AK

1" exit · 8 Ω · 60 W · 110 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil44 mm
Impedance8 Ω
Usable range800-20000 Hz
Min crossover1300 Hz
Sensitivity (on horn)110 dB
Magnetneodymium ring
Weight1.4 kg
Power (AES)60 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
Faital PRO HF10AK1300 =800 =20000 =44 =110 =close16 Ω vs 8 Ω: amp load changes+
Beyma CD-171Fe/PK1400 +100800 =20000 =44.4 +0.4109 -1closemin crossover 1400 Hz > 1300 Hz: raise the XO+
Beyma CD-171Fe/PT1200 -100800 =20000 =44.4 +0.4108 -2close+
Beyma CD10Nd/N1200 -100700 -10019000 -100044.3 +0.3111 +1close+
Beyma CD10Fe/N1200 -100700 -10019000 -100044.4 +0.4109 -1close+
Beyma CP/385/ND 8 OH.1500 +200800 =20000 =44.4 +0.4109 -1closemin crossover 1500 Hz > 1300 Hz: raise the XO+
Faital PRO HF1081300 =1000 +20020000 =44 =109 -1close16 Ω vs 8 Ω: amp load changes+
Faital PRO HF1081300 =1000 +20020000 =44 =109 -1close+
Faital PRO HF108R1300 =1000 +20020000 =44 =109 -1close16 Ω vs 8 Ω: amp load changes+
Faital PRO HF108R1300 =1000 +20020000 =44 =109 -1close+

Compare the closest 3 against the HF10AK →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.