← all drivers

Faital PRO HF100

1" exit · 8 Ω · 30 W · 108 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil25 mm
Impedance8 Ω
Usable range1500-20000 Hz
Min crossover2000 Hz
Sensitivity (on horn)108 dB
Magnetferrite ring
Weight0.83 kg
Power (AES)30 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
LaVoce DF10.101LE2000 =1500 =20000 =25.4 +0.4106 -2close16 Ω vs 8 Ω: amp load changes · 15 W vs 30 W: lower power handling+
LaVoce DF10.101LE2000 =1500 =20000 =25.4 +0.4106 -2close15 W vs 30 W: lower power handling+
Celestion CDX1-10102200 +2001500 =20000 =25 =107 -1close15 W vs 30 W: lower power handling · min crossover 2200 Hz > 2000 Hz: raise the XO+
Celestion CDX1-10702200 +2001500 =20000 =25 =106 -2close12 W vs 30 W: lower power handling · min crossover 2200 Hz > 2000 Hz: raise the XO+
LaVoce DF10.103M1900 -1001200 -30020000 =25.4 +0.4109 +1close+
Faital PRO HF1041700 -3001500 =20000 =37 +12108 =close16 Ω vs 8 Ω: amp load changes+
Faital PRO HF1041700 -3001500 =20000 =37 +12108 =close+
Beyma CD-101Fe/PK2000 =2000 +50020000 =28 +3108 =close+
Beyma CD-101Fe/PT2000 =2000 +50020000 =28 +3108 =close+
LaVoce DN10.141700 -3001500 =20000 =36 +11107 -1close16 Ω vs 8 Ω: amp load changes+

Compare the closest 3 against the HF100 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.