← all drivers

Faital PRO 8PR320

8" · 8 Ω · 300 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size8"
Impedance8 Ω
Fs65 Hz
Qts0.41
Qes0.43
Qms8.2
Vas13.1 L
Sd223 cm²
Xmax7.33 mm
Re5.4 Ω
Mms31.7 g
Pe300 W
Sensitivity95 dB

Alignment hint

EBP151 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 6.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
B&C 8CL5169 +40.41 =12.5 -0.66.5 -0.8394 -1close200 W vs 300 W: lower power handling · Xmax 6.5 mm < 7.33 mm: lower excursion-limited SPL+
B&C 8NDL5166 +10.37 -0.0414 +0.97 -0.3394 -1close200 W vs 300 W: lower power handling · Xmax 7 mm < 7.33 mm: lower excursion-limited SPL+
B&C 8NDL5170 +50.47 +0.0613.4 +0.37 -0.3394 -1close16 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 7 mm < 7.33 mm: lower excursion-limited SPL+
Faital PRO 8FE30070 +50.41 =14 +0.95.47 -1.8693 -2close4 Ω vs 8 Ω: amp load changes · Xmax 5.47 mm < 7.33 mm: lower excursion-limited SPL+
Faital PRO 8PR21065 =0.34 -0.0715.7 +2.67.17 -0.1694 -1usable16 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 7.17 mm < 7.33 mm: lower excursion-limited SPL+
Faital PRO 8PR20060 -50.46 +0.0516.1 +38.65 +1.3294 -1usable16 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling+
Faital PRO 8PR20058 -70.37 -0.0416.9 +3.88.15 +0.8295 =usable200 W vs 300 W: lower power handling+
LaVoce WAF082.0078 +130.37 -0.0411.92 -1.186.3 -1.0395 =usable200 W vs 300 W: lower power handling · Xmax 6.3 mm < 7.33 mm: lower excursion-limited SPL+
Faital PRO 8FE30070 +50.44 +0.0315.7 +2.65.52 -1.8195 =usableXmax 5.52 mm < 7.33 mm: lower excursion-limited SPL+
Beyma 8"G4070 +50.36 -0.0517 +3.96.5 -0.8395 =usableXmax 6.5 mm < 7.33 mm: lower excursion-limited SPL+

Compare the closest 3 against the 8PR320 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.