Faital PRO 8PR155
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 16 Ω |
| Fs | 85 Hz |
| Qts | 0.46 |
| Qes | 0.49 |
| Qms | 8.1 |
| Vas | 10.6 L |
| Sd | 217 cm² |
| Xmax | 3.57 mm |
| Re | 13.2 Ω |
| Mms | 21.8 g |
| Pe | 200 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 173 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 7.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 8 MI100 8 OHMS | 90 +5 | 0.45 -0.01 | 12 +1.4 | 3 -0.57 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 3 mm < 3.57 mm: lower excursion-limited SPL | + |
| Faital PRO 8PR155 | 85 = | 0.37 -0.09 | 9.4 -1.2 | 3.57 = | 97 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 8FE400 | 100 +15 | 0.48 +0.02 | 9.9 -0.7 | 4.87 +1.3 | 96 -1 | close | 4 Ω vs 16 Ω: amp load changes | + |
| LaVoce WSF081.82-16 | 81 -4 | 0.44 -0.02 | 14.17 +3.57 | 4.5 +0.93 | 95.5 -1.5 | usable | 150 W vs 200 W: lower power handling | + |
| B&C 8CL51 | 83 -2 | 0.51 +0.05 | 9.5 -1.1 | 6 +2.43 | 94 -3 | usable | + | |
| BMS 8S219 | 82 -3 | 0.41 -0.05 | 9.7 -0.9 | 6.3 +2.73 | 94 -3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 8FE400 | 100 +15 | 0.53 +0.07 | 9.4 -1.2 | 4.77 +1.2 | 96 -1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 8FE200 | 80 -5 | 0.45 -0.01 | 15.8 +5.2 | 4.62 +1.05 | 95 -2 | usable | 4 Ω vs 16 Ω: amp load changes · 130 W vs 200 W: lower power handling | + |
| BMS 8S215 | 87.7 +2.7 | 0.31 -0.15 | 11.04 +0.44 | 4.25 +0.68 | 96 -1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| LaVoce WAF082.00 | 78 -7 | 0.37 -0.09 | 11.92 +1.32 | 6.3 +2.73 | 95 -2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 8PR155 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.