Faital PRO 8FE400
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 100 Hz |
| Qts | 0.53 |
| Qes | 0.58 |
| Qms | 5.3 |
| Vas | 9.4 L |
| Sd | 233 cm² |
| Xmax | 4.77 mm |
| Re | 5 Ω |
| Mms | 20.5 g |
| Pe | 200 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 172 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 12.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 8FE400 | 100 = | 0.48 -0.05 | 9.9 +0.5 | 4.87 +0.1 | 96 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 8CL51 | 83 -17 | 0.51 -0.02 | 9.5 +0.1 | 6 +1.23 | 94 -2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 8NDL51 | 75 -25 | 0.57 +0.04 | 10.1 +0.7 | 7 +2.23 | 94 -2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 8PR155 | 85 -15 | 0.46 -0.07 | 10.6 +1.2 | 3.57 -1.2 | 97 +1 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 3.57 mm < 4.77 mm: lower excursion-limited SPL | + |
| BMS 8S219 | 82 -18 | 0.41 -0.12 | 9.7 +0.3 | 6.3 +1.53 | 94 -2 | usable | + | |
| Beyma 8 MI100 8 OHMS | 90 -10 | 0.45 -0.08 | 12 +2.6 | 3 -1.77 | 96 = | usable | Xmax 3 mm < 4.77 mm: lower excursion-limited SPL | + |
| Beyma 8CM V2 | 75 -25 | 0.52 -0.01 | 14.6 +5.2 | 5.7 +0.93 | 94 -2 | usable | + | |
| Faital PRO 8PR155 | 85 -15 | 0.37 -0.16 | 9.4 = | 3.57 -1.2 | 97 +1 | usable | Xmax 3.57 mm < 4.77 mm: lower excursion-limited SPL | + |
| 18 Sound 8NMB750 | 91 -9 | 0.37 -0.16 | 7.3 -2.1 | 6.3 +1.53 | 95 -1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSF081.82-16 | 81 -19 | 0.44 -0.09 | 14.17 +4.77 | 4.5 -0.27 | 95.5 -0.5 | usable | 16 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling · Xmax 4.5 mm < 4.77 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 8FE400 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.