Faital PRO 8FE300
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 70 Hz |
| Qts | 0.44 |
| Qes | 0.46 |
| Qms | 13.4 |
| Vas | 15.7 L |
| Sd | 223 cm² |
| Xmax | 5.52 mm |
| Re | 5.8 Ω |
| Mms | 22.9 g |
| Pe | 250 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 152 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 8FE200 | 80 +10 | 0.45 +0.01 | 15.8 +0.1 | 4.62 -0.9 | 95 = | close | 4 Ω vs 8 Ω: amp load changes · 130 W vs 250 W: lower power handling · Xmax 4.62 mm < 5.52 mm: lower excursion-limited SPL | + |
| Faital PRO 8FE300 | 70 = | 0.41 -0.03 | 14 -1.7 | 5.47 -0.05 | 93 -2 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 5.47 mm < 5.52 mm: lower excursion-limited SPL | + |
| B&C 8NDL51 | 70 = | 0.47 +0.03 | 13.4 -2.3 | 7 +1.48 | 94 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 8PR150 | 75 +5 | 0.48 +0.04 | 16.2 +0.5 | 5 -0.52 | 94 -1 | close | Xmax 5 mm < 5.52 mm: lower excursion-limited SPL | + |
| Beyma 8"G40 | 70 = | 0.36 -0.08 | 17 +1.3 | 6.5 +0.98 | 95 = | close | + | |
| Faital PRO 8PR200 | 60 -10 | 0.46 +0.02 | 16.1 +0.4 | 8.65 +3.13 | 94 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 8PR320 | 65 -5 | 0.41 -0.03 | 13.1 -2.6 | 7.33 +1.81 | 95 = | close | + | |
| 18 Sound 8MB500 | 74 +4 | 0.43 -0.01 | 21.5 +5.8 | 6 +0.48 | 95 = | close | + | |
| B&C 8CL51 | 69 -1 | 0.41 -0.03 | 12.5 -3.2 | 6.5 +0.98 | 94 -1 | close | + | |
| LaVoce WSF081.82-16 | 81 +11 | 0.44 = | 14.17 -1.53 | 4.5 -1.02 | 95.5 +0.5 | close | 16 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling · Xmax 4.5 mm < 5.52 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 8FE300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.