Faital PRO 8FE200
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 80 Hz |
| Qts | 0.63 |
| Qes | 0.66 |
| Qms | 13 |
| Vas | 16.1 L |
| Sd | 209 cm² |
| Xmax | 4.67 mm |
| Re | 5.9 Ω |
| Mms | 15 g |
| Pe | 130 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 121 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 62 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 8FE300 | 70 -10 | 0.66 +0.03 | 14.4 -1.7 | 5.52 +0.85 | 95 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 8FE200 | 80 = | 0.45 -0.18 | 15.8 -0.3 | 4.62 -0.05 | 95 = | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 4.62 mm < 4.67 mm: lower excursion-limited SPL | + |
| Beyma 8CM V2 | 75 -5 | 0.52 -0.11 | 14.6 -1.5 | 5.7 +1.03 | 94 -1 | usable | + | |
| Faital PRO 8PR150 | 75 -5 | 0.48 -0.15 | 16.2 +0.1 | 5 +0.33 | 94 -1 | usable | + | |
| Eminence ALPHA-8A | 73 -7 | 0.59 -0.04 | 17.7 +1.6 | 3.2 -1.47 | 94 -1 | usable | Xmax 3.2 mm < 4.67 mm: lower excursion-limited SPL | + |
| LaVoce WSF081.82-16 | 81 +1 | 0.44 -0.19 | 14.17 -1.93 | 4.5 -0.17 | 95.5 +0.5 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 4.67 mm: lower excursion-limited SPL | + |
| Faital PRO 8FE300 | 70 -10 | 0.44 -0.19 | 15.7 -0.4 | 5.52 +0.85 | 95 = | usable | + | |
| 18 Sound 8MB500 | 73 -7 | 0.5 -0.13 | 21.3 +5.2 | 6 +1.33 | 95 = | usable | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 8NDL51 | 75 -5 | 0.57 -0.06 | 10.1 -6 | 7 +2.33 | 94 -1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 8NDL51 | 70 -10 | 0.47 -0.16 | 13.4 -2.7 | 7 +2.33 | 94 -1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 8FE200 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.