Faital PRO 8FE200

8" · 4 Ω · 130 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size	8"
Impedance	4 Ω
Fs	80 Hz
Qts	0.45
Qes	0.47
Qms	8.7
Vas	15.8 L
Sd	209 cm²
Xmax	4.62 mm
Re	3 Ω
Mms	15.3 g
Pe	130 W
Sensitivity	95 dB

Alignment hint

EBP	170 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 10.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
LaVoce WSF081.82-16	81 +1	0.44 -0.01	14.17 -1.63	4.5 -0.12	95.5 +0.5	close	16 Ω vs 4 Ω: amp load changes · Xmax 4.5 mm < 4.62 mm: lower excursion-limited SPL	+
Faital PRO 8FE300	70 -10	0.44 -0.01	15.7 -0.1	5.52 +0.9	95 =	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 8PR150	75 -5	0.48 +0.03	16.2 +0.4	5 +0.38	94 -1	close	8 Ω vs 4 Ω: amp load changes	+
LaVoce WSF081.82	79 -1	0.38 -0.07	14.3 -1.5	4.6 -0.02	95.5 +0.5	close	8 Ω vs 4 Ω: amp load changes · Xmax 4.6 mm < 4.62 mm: lower excursion-limited SPL	+
Beyma 8CM V2	75 -5	0.52 +0.07	14.6 -1.2	5.7 +1.08	94 -1	close	8 Ω vs 4 Ω: amp load changes	+
18 Sound 8MB500	74 -6	0.43 -0.02	21.5 +5.7	6 +1.38	95 =	usable	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 8FE200	80 =	0.63 +0.18	16.1 +0.3	4.67 +0.05	95 =	usable	8 Ω vs 4 Ω: amp load changes	+
B&C 8NDL51	70 -10	0.47 +0.02	13.4 -2.4	7 +2.38	94 -1	usable	16 Ω vs 4 Ω: amp load changes	+
Faital PRO 8FE300	70 -10	0.41 -0.04	14 -1.8	5.47 +0.85	93 -2	usable		+
Faital PRO 8PR200	60 -20	0.46 +0.01	16.1 +0.3	8.65 +4.03	94 -1	usable	16 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the 8FE200 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.