Faital PRO 6PR122
Thiele-Small parameters
| Nominal size | 6" |
|---|---|
| Impedance | 8 Ω |
| Fs | 110 Hz |
| Qts | 0.39 |
| Qes | 0.44 |
| Qms | 3.3 |
| Vas | 4.7 L |
| Sd | 137.3 cm² |
| Xmax | 2.75 mm |
| Re | 6 Ω |
| Mms | 11.7 g |
| Pe | 120 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 250 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 6PR150 | 100 -10 | 0.34 -0.05 | 4.9 +0.2 | 2.65 -0.1 | 97 = | close | Xmax 2.65 mm < 2.75 mm: lower excursion-limited SPL | + |
| Faital PRO 6FE200 | 120 +10 | 0.42 +0.03 | 4.3 -0.4 | 4.62 +1.87 | 95 -2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE400 | 100 -10 | 0.36 -0.03 | 5 +0.3 | 4.77 +2.02 | 94 -3 | usable | + | |
| Faital PRO 6FE300 | 100 -10 | 0.46 +0.07 | 4.7 = | 3.9 +1.15 | 94 -3 | usable | + | |
| Faital PRO 6FE400 | 100 -10 | 0.36 -0.03 | 4.9 +0.2 | 4.87 +2.12 | 93 -4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE300 | 98 -12 | 0.41 +0.02 | 4.4 -0.3 | 3.9 +1.15 | 92 -5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Eminence ALPHA 6C | 107 -3 | 0.45 +0.06 | 5.7 +1 | 3.5 +0.75 | 93.3 -3.7 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSN061.52 | 90 -20 | 0.39 = | 5.92 +1.22 | 3.8 +1.05 | 94 -3 | usable | + | |
| LaVoce MAN062.00-16 | 103 -7 | 0.34 -0.05 | 3.77 -0.93 | 3.9 +1.15 | 94.5 -2.5 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSN061.52-4 | 90 -20 | 0.37 -0.02 | 5.15 +0.45 | 4 +1.25 | 92.5 -4.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 6PR122 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.