← all drivers

Faital PRO 6FE400

6" · 8 Ω · 200 W · 94 dB · datasheet ↗

Thiele-Small parameters

Nominal size6"
Impedance8 Ω
Fs100 Hz
Qts0.36
Qes0.4
Qms3.7
Vas5 L
Sd141 cm²
Xmax4.77 mm
Re5 Ω
Mms14 g
Pe200 W
Sensitivity94 dB

Alignment hint

EBP250 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 1.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 6FE400100 =0.36 =4.9 -0.14.87 +0.193 -1close4 Ω vs 8 Ω: amp load changes+
LaVoce WSN061.52-490 -100.37 +0.015.15 +0.154 -0.7792.5 -1.5close4 Ω vs 8 Ω: amp load changes · 125 W vs 200 W: lower power handling · Xmax 4 mm < 4.77 mm: lower excursion-limited SPL+
Faital PRO 6PR16090 -100.33 -0.035.9 +0.95 +0.2395 +1close120 W vs 200 W: lower power handling+
Faital PRO 6FE300100 =0.46 +0.14.7 -0.33.9 -0.8794 =usableXmax 3.9 mm < 4.77 mm: lower excursion-limited SPL+
LaVoce MAN062.00-16103 +30.34 -0.023.77 -1.233.9 -0.8794.5 +0.5usable16 Ω vs 8 Ω: amp load changes · Xmax 3.9 mm < 4.77 mm: lower excursion-limited SPL+
Faital PRO 6FE400100 =0.5 +0.145.5 +0.54.77 =94 =usable16 Ω vs 8 Ω: amp load changes+
LaVoce WSN061.5290 -100.39 +0.035.92 +0.923.8 -0.9794 =usable125 W vs 200 W: lower power handling · Xmax 3.8 mm < 4.77 mm: lower excursion-limited SPL+
Faital PRO 6FE30098 -20.41 +0.054.4 -0.63.9 -0.8792 -2usable4 Ω vs 8 Ω: amp load changes · Xmax 3.9 mm < 4.77 mm: lower excursion-limited SPL+
Faital PRO 6FE200120 +200.42 +0.064.3 -0.74.62 -0.1595 +1usable4 Ω vs 8 Ω: amp load changes · 130 W vs 200 W: lower power handling · Xmax 4.62 mm < 4.77 mm: lower excursion-limited SPL+
LaVoce WSF061.5291 -90.34 -0.026.62 +1.623.8 -0.9795 +1usable125 W vs 200 W: lower power handling · Xmax 3.8 mm < 4.77 mm: lower excursion-limited SPL+

Compare the closest 3 against the 6FE400 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.