Faital PRO 6FE100
Thiele-Small parameters
| Nominal size | 6" |
|---|---|
| Impedance | 8 Ω |
| Fs | 61 Hz |
| Qts | 0.55 |
| Qes | 0.6 |
| Qms | 6 |
| Vas | 15.1 L |
| Sd | 149 cm² |
| Xmax | 5.25 mm |
| Re | 5.4 Ω |
| Mms | 14 g |
| Pe | 100 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 102 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 6FE125 | 61 = | 0.55 = | 15.1 = | 5.25 = | 91 = | close | + | |
| LaVoce WAF061.80-16 | 66 +5 | 0.55 = | 7.05 -8.05 | 4.8 -0.45 | 89 -2 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 4.8 mm < 5.25 mm: lower excursion-limited SPL | + |
| Faital PRO 6RS140 | 65 +4 | 0.36 -0.19 | 9.9 -5.2 | 5.5 +0.25 | 92 +1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 6S117 | 80 +19 | 0.43 -0.12 | 10.4 -4.7 | 5 -0.25 | 93 +2 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 5.25 mm: lower excursion-limited SPL | + |
| Sica 6 H 1.5 CP | 46 -15 | 0.35 -0.2 | 16.6 +1.5 | 6 +0.75 | 89.4 -1.6 | usable | + | |
| LaVoce WAF061.80 | 65 +4 | 0.42 -0.13 | 7.26 -7.84 | 4.9 -0.35 | 91 = | usable | Xmax 4.9 mm < 5.25 mm: lower excursion-limited SPL | + |
| LaVoce WAN061.80-16 | 62 +1 | 0.31 -0.24 | 10.26 -4.84 | 5.2 -0.05 | 92.5 +1.5 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 5.2 mm < 5.25 mm: lower excursion-limited SPL | + |
| Sica 6 L 1.5 SL | 59 -2 | 0.39 -0.16 | 11 -4.1 | 2.5 -2.75 | 91 = | risky | Xmax 2.5 mm < 5.25 mm: lower excursion-limited SPL | + |
| Sica 6 E 1.5 CS | 60 -1 | 0.38 -0.17 | 11.3 -3.8 | 2.5 -2.75 | 91.5 +0.5 | risky | Xmax 2.5 mm < 5.25 mm: lower excursion-limited SPL | + |
| Sica 6 NR 2 PL | 60.5 -0.5 | 0.33 -0.22 | 9.4 -5.7 | 4 -1.25 | 91.4 +0.4 | risky | Xmax 4 mm < 5.25 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 6FE100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.