Faital PRO 18HW1070
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 32 Hz |
| Qts | 0.33 |
| Qes | 0.34 |
| Qms | 10.6 |
| Vas | 191.5 L |
| Sd | 1212 cm² |
| Xmax | 13 mm |
| Re | 3 Ω |
| Mms | 265 g |
| Pe | 1600 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 94 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 53.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF LF18N408 | 30 -2 | 0.33 = | 193 +1.5 | 15 +2 | 97 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18TBW100 | 33 +1 | 0.32 -0.01 | 181.5 -10 | 12 -1 | 96 = | close | Xmax 12 mm < 13 mm: lower excursion-limited SPL | + |
| 18 Sound 18NLW4100 | 31 -1 | 0.34 +0.01 | 180 -11.5 | 15 +2 | 96.5 +0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18SW115 | 32 = | 0.3 -0.03 | 187 -4.5 | 14 +1 | 97 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 18NTLW5000 | 32 = | 0.32 -0.01 | 176 -15.5 | 17.5 +4.5 | 95 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 18XL1600 | 32 = | 0.31 -0.02 | 201.1 +9.6 | 12.92 -0.08 | 98 +2 | close | Xmax 12.92 mm < 13 mm: lower excursion-limited SPL | + |
| Faital PRO 18HW1070 | 32 = | 0.38 +0.05 | 195.9 +4.4 | 13 = | 97 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 18HP1060 | 35 +3 | 0.33 = | 184.4 -7.1 | 12.45 -0.55 | 98 +2 | close | 1200 W vs 1600 W: lower power handling · Xmax 12.45 mm < 13 mm: lower excursion-limited SPL | + |
| 18 Sound 18TLW3000 | 32 = | 0.35 +0.02 | 185 -6.5 | 12 -1 | 94 -2 | close | Xmax 12 mm < 13 mm: lower excursion-limited SPL | + |
| Beyma 18SW1600ND | 32 = | 0.33 = | 205.7 +14.2 | 10 -3 | 96.6 +0.6 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 10 mm < 13 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18HW1070 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.