Faital PRO 18HP1030
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 35 Hz |
| Qts | 0.32 |
| Qes | 0.33 |
| Qms | 12.3 |
| Vas | 172.2 L |
| Sd | 1212 cm² |
| Xmax | 12.45 mm |
| Re | 2.9 Ω |
| Mms | 246.3 g |
| Pe | 1200 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 44.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 18HP1060 | 35 = | 0.33 +0.01 | 184.4 +12.2 | 12.45 = | 98 = | close | + | |
| Oberton 18XB1301DS | 35.7 +0.7 | 0.302 -0.02 | 172.9 +0.7 | 12 -0.45 | 97.5 -0.5 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 12 mm < 12.45 mm: lower excursion-limited SPL | + |
| Oberton 18NXB1600 | 32.37 -2.63 | 0.303 -0.02 | 173.11 +0.91 | 13.5 +1.05 | 97 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18TBW100 | 33 -2 | 0.32 = | 181.5 +9.3 | 12 -0.45 | 96 -2 | close | Xmax 12 mm < 12.45 mm: lower excursion-limited SPL | + |
| 18 Sound 18NLW4500 | 35 = | 0.33 +0.01 | 151 -21.2 | 15.3 +2.85 | 97 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PD 1845-1N | 34.1 -0.9 | 0.323 = | 176 +3.8 | 9.5 -2.95 | 97.5 -0.5 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 9.5 mm < 12.45 mm: lower excursion-limited SPL | + |
| Precision Devices PD 1845-1N | 34.1 -0.9 | 0.323 = | 176 +3.8 | 9.5 -2.95 | 97.5 -0.5 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 9.5 mm < 12.45 mm: lower excursion-limited SPL | + |
| Faital PRO 18XL1600 | 32 -3 | 0.31 -0.01 | 201.1 +28.9 | 12.92 +0.47 | 98 = | close | + | |
| 18 Sound 18NLW9000 | 34 -1 | 0.31 -0.01 | 206 +33.8 | 14 +1.55 | 97 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18DS100 | 34 -1 | 0.29 -0.03 | 155 -17.2 | 14.5 +2.05 | 97.5 -0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 18HP1030 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.