← all drivers

Faital PRO 18FH510

18" · 4 Ω · 600 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size18"
Impedance4 Ω
Fs30 Hz
Qts0.26
Qes0.27
Qms13.6
Vas391.4 L
Sd1207 cm²
Xmax9.45 mm
Re3.3 Ω
Mms146.3 g
Pe600 W
Sensitivity98 dB

Alignment hint

EBP111 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 61.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 18FH51030 =0.29 +0.03411.9 +20.59.25 -0.298 =close8 Ω vs 4 Ω: amp load changes · Xmax 9.25 mm < 9.45 mm: lower excursion-limited SPL+
RCF LF 18X40028 -20.255 -0.01360 -31.49 -0.4598.6 +0.6close8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 9.45 mm: lower excursion-limited SPL+
RCF LF18G40028 -20.27 +0.01360 -31.49 -0.4597.5 -0.5close8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 9.45 mm: lower excursion-limited SPL+
RCF LF 18G40028 -20.273 +0.01360 -31.49 -0.4598.3 +0.3close8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 9.45 mm: lower excursion-limited SPL+
RCF LF18X40028 -20.27 +0.01340 -51.49 -0.4597.5 -0.5close8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 9.45 mm: lower excursion-limited SPL+
18 Sound 18ND930030 =0.28 +0.02322 -69.49.5 +0.0598.8 +0.8close8 Ω vs 4 Ω: amp load changes+
JBL 2258H31 +10.265 +0.01407 +15.68 -1.45100.2 +2.2close8 Ω vs 4 Ω: amp load changes · Xmax 8 mm < 9.45 mm: lower excursion-limited SPL+
RCF LF 18X400 v228 -20.278 +0.02340 -51.49 -0.4598 =close8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 9.45 mm: lower excursion-limited SPL+
PD PD 18228 -20.238 -0.02391 -0.48.2 -1.2598.7 +0.7close8 Ω vs 4 Ω: amp load changes · Xmax 8.2 mm < 9.45 mm: lower excursion-limited SPL+
Precision Devices PD 18228 -20.238 -0.02391 -0.48.2 -1.2598.7 +0.7close8 Ω vs 4 Ω: amp load changes · Xmax 8.2 mm < 9.45 mm: lower excursion-limited SPL+

Compare the closest 3 against the 18FH510 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.