Faital PRO 15HP1060

15" · 4 Ω · 1000 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size	15"
Impedance	4 Ω
Fs	40 Hz
Qts	0.34
Qes	0.35
Qms	10.3
Vas	76.3 L
Sd	842 cm²
Xmax	12.45 mm
Re	2.9 Ω
Mms	205.4 g
Pe	1000 W
Sensitivity	97 dB

Alignment hint

EBP	114 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 22.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 15HP1030	40 =	0.34 =	95 +18.7	12.45 =	96 -1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 15XL1400	38 -2	0.33 -0.01	91.2 +14.9	12.92 +0.47	96 -1	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 15LEX1600Nd	41 +1	0.36 +0.02	91 +14.7	14.5 +2.05	96 -1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 15HP1030	40 =	0.3 -0.04	88.3 +12	12.45 =	96 -1	close		+
Faital PRO 15HP1060	40 =	0.31 -0.03	100.3 +24	12.45 =	97 =	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 15XL1400	38 -2	0.3 -0.04	84.3 +8	12.92 +0.47	96 -1	close		+
B&C 15DS100	39 -1	0.26 -0.08	76 -0.3	14.5 +2.05	96.8 -0.2	close	8 Ω vs 4 Ω: amp load changes	+
B&C 15TBW100	39 -1	0.31 -0.03	96 +19.7	12 -0.45	96 -1	close	8 Ω vs 4 Ω: amp load changes · Xmax 12 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 15XL1200	40 =	0.4 +0.06	86.9 +10.6	12.45 =	95 -2	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 15LEX1600Fe	38 -2	0.33 -0.01	106 +29.7	13 +0.55	96 -1	close	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the 15HP1060 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.