Faital PRO 15HP1030

15" · 4 Ω · 1000 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	15"
Impedance	4 Ω
Fs	40 Hz
Qts	0.3
Qes	0.31
Qms	13.4
Vas	88.3 L
Sd	842 cm²
Xmax	12.45 mm
Re	3.97 Ω
Mms	177.5 g
Pe	1000 W
Sensitivity	96 dB

Alignment hint

EBP	129 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 19.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 15XL1400	38 -2	0.3 =	84.3 -4	12.92 +0.47	96 =	close		+
B&C 15TBW100	39 -1	0.31 +0.01	96 +7.7	12 -0.45	96 =	close	8 Ω vs 4 Ω: amp load changes · Xmax 12 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 15TBW100	39 -1	0.28 -0.02	88 -0.3	12 -0.45	95 -1	close	Xmax 12 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 15HP1060	40 =	0.31 +0.01	100.3 +12	12.45 =	97 +1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 15XL1400	38 -2	0.33 +0.03	91.2 +2.9	12.92 +0.47	96 =	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 15HP1030	40 =	0.34 +0.04	95 +6.7	12.45 =	96 =	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 15LEX1600Nd	41 +1	0.36 +0.06	91 +2.7	14.5 +2.05	96 =	close	8 Ω vs 4 Ω: amp load changes	+
B&C 15SW100	37 -3	0.28 -0.02	99.5 +11.2	12.5 +0.05	95 -1	close		+
Faital PRO 15HP1060	40 =	0.34 +0.04	76.3 -12	12.45 =	97 +1	close		+
Beyma 15LEX1600Fe	38 -2	0.33 +0.03	106 +17.7	13 +0.55	96 =	close	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the 15HP1030 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.