Faital PRO 15FX560
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.3 |
| Qes | 0.31 |
| Qms | 6.8 |
| Vas | 159 L |
| Sd | 864 cm² |
| Xmax | 9.42 mm |
| Re | 5.2 Ω |
| Mms | 115 g |
| Pe | 700 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 123 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 34.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15ND940 | 38 = | 0.28 -0.02 | 174 +15 | 9.5 +0.08 | 99 = | close | + | |
| Elokance 15WF2400 | 38 = | 0.32 +0.02 | 165.2 +6.2 | 10.5 +1.08 | 98.1 -0.9 | close | + | |
| Fane COLOSSUS 15XS | 36.3 -1.7 | 0.307 +0.01 | 149.7 -9.3 | 9.1 -0.32 | 97.3 -1.7 | close | Xmax 9.1 mm < 9.42 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS PRIME 15XS | 36.3 -1.7 | 0.307 +0.01 | 149.7 -9.3 | 9.1 -0.32 | 97.3 -1.7 | close | Xmax 9.1 mm < 9.42 mm: lower excursion-limited SPL | + |
| BMS 15N840 v2015 | 35.6 -2.4 | 0.303 = | 145.7 -13.3 | 9.9 +0.48 | 97.1 -1.9 | close | + | |
| 18 Sound 15ND940 | 39 +1 | 0.26 -0.04 | 170 +11 | 9.5 +0.08 | 99 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| JBL 2255H | 39 +1 | 0.303 = | 170 +11 | 7.1 -2.32 | 98.9 -0.1 | close | Xmax 7.1 mm < 9.42 mm: lower excursion-limited SPL | + |
| B&C 15NDL88 | 41 +3 | 0.28 -0.02 | 154 -5 | 8 -1.42 | 99 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 8 mm < 9.42 mm: lower excursion-limited SPL | + |
| BMS 15S330 | 39 +1 | 0.32 +0.02 | 152 -7 | 8 -1.42 | 98 -1 | close | Xmax 8 mm < 9.42 mm: lower excursion-limited SPL | + |
| Beyma 15G40 | 37 -1 | 0.301 = | 149 -10 | 7.7 -1.72 | 97.2 -1.8 | close | Xmax 7.7 mm < 9.42 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15FX560 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.