← all drivers

Faital PRO 15FH520

15" · 4 Ω · 600 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance4 Ω
Fs38 Hz
Qts0.34
Qes0.35
Qms9
Vas153.2 L
Sd847 cm²
Xmax9.15 mm
Re2.7 Ω
Mms114.7 g
Pe600 W
Sensitivity97 dB

Alignment hint

EBP109 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 46.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 15FH53039 +10.35 +0.01140.6 -12.69.25 +0.197 =close8 Ω vs 4 Ω: amp load changes+
RCF L 15P200AK-II38 =0.336 =139 -14.28.3 -0.8596.3 -0.7close8 Ω vs 4 Ω: amp load changes · Xmax 8.3 mm < 9.15 mm: lower excursion-limited SPL+
PD PD 15BR4038.7 +0.70.34 =158.3 +5.17.9 -1.2598.1 +1.1close8 Ω vs 4 Ω: amp load changes · Xmax 7.9 mm < 9.15 mm: lower excursion-limited SPL+
Precision Devices PD 15BR4038.7 +0.70.34 =158.3 +5.17.9 -1.2598.1 +1.1close8 Ω vs 4 Ω: amp load changes · Xmax 7.9 mm < 9.15 mm: lower excursion-limited SPL+
Fane COLOSSUS 15XS36.3 -1.70.307 -0.03149.7 -3.59.1 -0.0597.3 +0.3close8 Ω vs 4 Ω: amp load changes · Xmax 9.1 mm < 9.15 mm: lower excursion-limited SPL+
Fane COLOSSUS PRIME 15XS36.3 -1.70.307 -0.03149.7 -3.59.1 -0.0597.3 +0.3close8 Ω vs 4 Ω: amp load changes · Xmax 9.1 mm < 9.15 mm: lower excursion-limited SPL+
Elokance 15WF240038 =0.32 -0.02165.2 +1210.5 +1.3598.1 +1.1close8 Ω vs 4 Ω: amp load changes+
RCF L 15P200AK38 =0.351 +0.01139 -14.28.2 -0.9596.4 -0.6close8 Ω vs 4 Ω: amp load changes · Xmax 8.2 mm < 9.15 mm: lower excursion-limited SPL+
RCF L 15P200AK-I38 =0.36 +0.02139 -14.28.5 -0.6596.3 -0.7close8 Ω vs 4 Ω: amp load changes · Xmax 8.5 mm < 9.15 mm: lower excursion-limited SPL+
BMS 15S33039 +10.32 -0.02152 -1.28 -1.1598 +1close8 Ω vs 4 Ω: amp load changes · Xmax 8 mm < 9.15 mm: lower excursion-limited SPL+

Compare the closest 3 against the 15FH520 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.